The 2015 Ford F-150 is a robust and succesful pickup truck. Should you’re planning on towing a trailer, you may want to put in a brake controller to make sure that your trailer’s brakes are working correctly. Putting in a brake controller will not be a tough job, nevertheless it does require some fundamental electrical data. On this article, we’ll stroll you thru the steps on the best way to add a brake controller to your 2015 F-150.
Earlier than you start, you may want to assemble a couple of instruments and supplies. You will want a brake controller, a wiring harness, a drill, and a screwdriver. You will additionally must seek the advice of your truck’s proprietor’s guide to find the right wiring diagram. Upon getting all the pieces you want, you are prepared to start the set up course of.
Step one is to find the brake controller mounting bracket. The bracket is often situated below the dashboard, on the motive force’s aspect. As soon as you have discovered the bracket, you may must drill a couple of holes to mount the brake controller. As soon as the brake controller is mounted, you may want to attach the wiring harness. The wiring harness will join the brake controller to the truck’s electrical system. As soon as the wiring harness is linked, you may want to check the brake controller to guarantee that it is working correctly. To do that, merely apply the brakes in your truck and guarantee that the trailer’s brakes are additionally engaged.
Mounting the Brake Controller
To mount the brake controller, you will want the next instruments:
Phillips head screwdriver
Flat-blade screwdriver
Drill
1/4-inch drill bit
1/2-inch drill bit
7/16-inch wrench
Wire strippers
Electrical tape
Drilling the Gap for the Brake Controller
1. Use the 1/4-inch drill bit to drill a pilot gap within the desired location for the brake controller.
2. Use the 1/2-inch drill bit to widen the outlet to 1/2 inch.
3. Insert the brake controller into the outlet and tighten the mounting screws.
Wiring the Brake Controller
1. Join the crimson wire from the brake controller to the optimistic terminal on the battery.
2. Join the black wire from the brake controller to the adverse terminal on the battery.
3. Join the blue wire from the brake controller to the brake change on the brake pedal.
4. Join the white wire from the brake controller to the bottom terminal on the chassis.
Testing the Brake Controller
1. Begin the engine and apply the brakes.
2. The brake controller ought to activate and the brake lights ought to come on.
3. If the brake controller doesn’t activate, verify the wiring connections and guarantee that the brake change is correctly adjusted.
Connecting the Trailer Brake Wires
Now that you’ve a suitable brake controller and the mandatory instruments, listed below are the detailed steps to attach the trailer brake wires:
Step 1: Collect Your Supplies
Earlier than beginning, guarantee you’ve got all the mandatory supplies, together with the brake controller, wiring harness, electrical tape, wire strippers, and crimp connectors.
Step 2: Find the Wiring Harness
Establish the brake controller wiring harness in your truck. It’s usually situated behind the dashboard or below the steering column.
Step 3: Join the Energy Wires
Join the black wire from the controller to a floor level on the truck’s body utilizing a crimp connector. Join the yellow wire to a relentless 12-volt energy supply, such because the battery or ignition change.
Step 4: Join the Brake Output Wires
Establish the blue and crimson wires from the controller. Crimp the blue wire to the brake gentle change wire, usually a inexperienced wire, utilizing a butt connector. Crimp the crimson wire to the stoplight wire.
Step 5: Join the Trailer Wires
Find the trailer’s wiring harness and join the controller’s black wire to the white wire on the trailer. Join the controller’s yellow wire to the brown wire on the trailer.
Step 6: Join the Brake Sign Wire
Join the blue wire from the controller to the blue wire on the trailer’s brake circuit. This wire sends the brake sign to the trailer’s brakes.
Step 7: Double-Test and Insulate
Completely verify all connections to make sure they’re safe and insulated. Wrap electrical tape round all uncovered wire ends and any connections made with crimp connectors. This prevents brief circuits and ensures a dependable connection.
Step 8: Take a look at the System
Join the trailer to the truck and take a look at the brake controller. Press the brake pedal and observe if the trailer’s brakes are activated. Modify the controller’s settings as wanted for optimum braking efficiency.
| Wire Coloration (Truck) | Operate | Connection |
|---|---|---|
| Black | Floor | Truck body |
| Yellow | Energy | Battery or ignition change |
| Blue | Brake Sign | Brake gentle change |
| Crimson | Stoplight | Stoplight wire |
| Wire Coloration (Trailer) | Operate | Connection |
|---|---|---|
| White | Floor | Controller black wire |
| Brown | Energy | Controller yellow wire |
| Blue | Brake Sign | Controller blue wire |
Putting in the Brake Mild Swap
The brake gentle change is liable for activating the brake lights when the brake pedal is depressed. To put in the brake gentle change, observe these steps:
1. Find the brake gentle change on the brake pedal meeting. It’s often situated close to the highest of the pedal.
2. Disconnect {the electrical} connector from the brake gentle change.
3. Use a wrench to take away the brake gentle change from the brake pedal meeting.
4. Apply a small quantity of grease to the threads of the brand new brake gentle change.
5. Set up the brand new brake gentle change into the brake pedal meeting.
6. Tighten the brake gentle change utilizing a wrench.
7. Join {the electrical} connector to the brake gentle change.
8. Depress the brake pedal to check the brake gentle change. The brake lights ought to illuminate when the brake pedal is depressed.
Checking the Brake Mild Swap
If you’re having issues together with your brake lights, you may verify the brake gentle change to see whether it is defective. To verify the brake gentle change, observe these steps:
1. Disconnect {the electrical} connector from the brake gentle change.
2. Use a multimeter to verify for continuity between the 2 terminals of the brake gentle change.
3. If there is no such thing as a continuity, the brake gentle change is defective and must be changed.
Sustaining the Brake Controller
To make sure your brake controller features correctly and safely, common upkeep is important. Listed below are some key steps to observe:
- Examine the Brake Controller: Repeatedly examine the brake controller for any indicators of harm, comparable to free connections or frayed wires.
- Clear the Brake Controller: Use a smooth material and gentle detergent to softly clear the brake controller to take away grime and dirt.
- Test the Brake Pedal Sensitivity: The brake pedal sensitivity needs to be adjusted to fit your driving fashion and cargo weight. Consult with the brake controller guide for steering.
- Take a look at the Brake Controller: Conduct a take a look at drive with the trailer hooked up to confirm that the brake controller is working appropriately.
- Confirm Trailer Brake Operation: Examine the trailer brakes to make sure they’re correctly activated when making use of the brake pedal.
- Lubricate the Brake Controller: If specified by the producer, lubricate the brake controller as per the offered directions.
- Replace the Brake Controller Firmware: If firmware updates can be found, set up them to reinforce the brake controller’s performance and handle any potential points.
- Examine Wiring and Connections: Completely look at the wiring and connections for any harm, corrosion, or free terminals, particularly these uncovered to the weather.
- Use High quality Elements: Make sure that all parts used with the brake controller, comparable to trailer wiring and connectors, are high-quality and suitable together with your automobile and trailer.
- Consult with the Consumer Handbook: All the time seek the advice of the brake controller consumer guide for particular upkeep directions and troubleshooting ideas.
| Further Upkeep Ideas |
|---|
| – Test the brake fluid stage repeatedly and high it off if obligatory. |
| – Have your complete brake system inspected and serviced by a certified mechanic as really useful by the automobile producer. |
| – Retailer the brake controller in a dry and guarded location when not in use. |
2015 F150 How To Add Brake Controller
Should you’re towing a trailer together with your 2015 F150, you may want to put in a brake controller. This may permit you to manually management the trailer’s brakes, which is necessary for security and stopping accidents.
Here is a step-by-step information on the best way to set up a brake controller in your 2015 F150:
- Collect your supplies. You will want a brake controller, wiring harness, and mounting bracket.
- Disconnect the adverse battery terminal.
- Find the brake pedal meeting. The brake controller will likely be mounted below the sprint, to the left of the brake pedal.
- Set up the mounting bracket. The bracket will likely be hooked up to the brake pedal meeting utilizing the offered bolts.
- Join the wiring harness to the brake controller. The wiring harness will likely be plugged into the brake controller and the brake pedal meeting.
- Join the adverse battery terminal.
- Take a look at the brake controller. Apply the brakes and guarantee that the trailer’s brakes are additionally participating.
Folks Additionally Ask About 2015 F150 How To Add Brake Controller
Can I set up a brake controller myself?
Sure, you may set up a brake controller your self in case you have some fundamental automotive data and instruments.
The place is one of the best place to mount a brake controller?
The perfect place to mount a brake controller is below the sprint, to the left of the brake pedal. This will provide you with quick access to the controller whereas driving.
What kind of brake controller do I would like for my 2015 F150?
You have to a brake controller that’s suitable together with your 2015 F150’s towing capability. Seek the advice of your proprietor’s guide or a certified technician to find out the right brake controller in your automobile.
