Reaper 7 introduces a strong new characteristic referred to as Comping Takes Play Chosen Take. This revolutionary software lets you shortly and simply audition and choose the very best takes from a number of recordings, saving you numerous hours of tedious enhancing. With Comping Takes Play Chosen Take, you possibly can effortlessly create flawless performances by combining the very best components of every take right into a single, cohesive monitor.
Comping Takes Play Chosen Take is extremely user-friendly. Merely choose the takes you wish to audition and press the “Comp Takes” button. Reaper will mechanically play every soak up sequence, permitting you to listen to how they sound collectively. You may then use the “Play Chosen Take” button to immediately hear solely the chosen take. This seamless workflow makes it straightforward to experiment with completely different mixtures of takes till you discover the right association.
Along with its highly effective comping capabilities, Comping Takes Play Chosen Take gives superior choices for customizing your workflow. You may regulate the playback velocity and quantity of every take, create customized fade-ins and fade-outs, and even crossfade between takes. This degree of management offers you the flexibleness to create advanced and nuanced performances that carry your music to life. Whether or not you are a seasoned producer or simply beginning out, Comping Takes Play Chosen Take is a vital software that can revolutionize your recording course of. So what are you ready for? Expertise the ability of comping at this time and take your music to the subsequent degree.
Finding the Comping Takes Panel
To entry the Comping Takes Panel in Reaper 7, comply with these detailed steps:
- Find the Observe Management Panel (TCP): Click on on the TCP button positioned on the top-right nook of the principle Reaper window.
- Allow the Comping Takes Button: Inside the TCP, search for a small button labeled “Comping Takes.” Whether it is disabled, click on on it to allow it.
- Entry the Comping Takes Panel: As soon as the button is enabled, a brand new panel will seem beneath the TCP, titled “Comping Takes.” That is the Comping Takes Panel, the place you possibly can handle and work together with your comped takes.
Extra Ideas:
- Keyboard Shortcut: You can even entry the Comping Takes Panel utilizing the keyboard shortcut “Ctrl/Cmd + Alt + C.”
- Customizable Workflow: The Comping Takes Panel will be personalized to suit your workflow. Proper-click on the panel and choose “Customise Comping Takes Panel” to switch its structure and performance.
Inputting A number of Takes
To enter a number of takes, comply with these steps:
- Choose the takes you wish to comp collectively. You may choose a number of takes by clicking on them whereas holding down the Ctrl key.
- Proper-click on one of many chosen takes and choose “Comp Takes.” The next dialog field will seem:
- Output: Choose whether or not you wish to create a brand new monitor for the comped take or add it to an current monitor.
- Take Order: Choose the order during which the takes shall be comped. “As recorded” will comp the takes within the order they had been recorded, whereas “As listed” will comp them within the order they’re listed within the Take Browser.
- Fade Tail: Choose whether or not or to not fade out the tail of the earlier take when the subsequent take is performed. This may also help to easy out the transitions between takes.
- Crossfade Size: Enter the size of the crossfade between takes. This may also help to create a smoother transition between takes.
- Click on OK to comp the takes. The comped take shall be positioned within the undertaking timeline.
| Output | Take Order | Fade Tail | Crossfade Size |
|---|---|---|---|
Deciding on the Desired Take
After you have recorded a number of takes, you possibly can choose the specified take to make use of in your undertaking. To do that, comply with these steps:
- Click on on the “Take” menu within the Reaper toolbar.
- Choose the “Comping Takes” choice.
- Within the “Comping Takes” window, you will notice a listing of all of the takes that you’ve recorded. To pick out a take, click on on the “Choose” button subsequent to the take.
- After you have chosen a take, you possibly can click on on the “Play Chosen Take” button to listen to the take.
- To make the chosen take the default take, click on on the “Make Chosen Take Default” button.
| Take | The identify of the take. |
| Size | The size of the soak up beats. |
| Begin | The beginning time of the soak up beats. |
| Finish | The top time of the soak up beats. |
| Notes | Any notes that you’ve made in regards to the take. |
Taking part in the Chosen Take
As soon as a take has been chosen, there are a number of methods to play it.
Keyboard Shortcuts
You need to use the next keyboard shortcuts to play the chosen take:
| Shortcut | Motion |
|---|---|
| Enter | Play the chosen take from the cursor place |
| Shift+Enter | Play the chosen take from the start |
| Alt+Enter | Play the chosen soak up loop mode |
Transport Controls
You can even play the chosen take utilizing the transport controls within the toolbar.
To play the chosen take from the cursor place, click on the Play button.
To play the chosen take from the start, click on the Rewind button after which click on the Play button.
To play the chosen soak up loop mode, click on the Loop button after which click on the Play button.
Increasing the Take Lanes
Reaper 7 gives the power to broaden the take lanes, offering you with extra flexibility when working with a number of takes. To broaden the take lanes:
- Proper-click on the take lane you wish to broaden.
- Choose “Increase Take Lanes”.
- The take lanes shall be expanded to the left and proper.
You can even use the next keyboard shortcuts to broaden the take lanes:
| Shortcut | Motion |
|---|---|
| Ctrl+Alt+Up Arrow | Increase the take lanes above the chosen take |
| Ctrl+Alt+Down Arrow | Increase the take lanes beneath the chosen take |
| Ctrl+Alt+Left Arrow | Increase the take lanes to the left of the chosen monitor |
| Ctrl+Alt+Proper Arrow | Increase the take lanes to the suitable of the chosen monitor |
Increasing the take lanes will be helpful for a wide range of causes, similar to:
- Viewing extra takes directly
- Making it simpler to pick out and evaluate takes
- Creating house for extra takes
- Organizing your takes in a extra logical manner
- Bettering the general workflow when working with a number of takes
Adjusting the Take Size
As soon as you’ve got chosen the takes you wish to comp, you possibly can regulate their size to fine-tune the ultimate outcome.
To regulate the size of a take, choose it within the Take Browser or the Observe. Then, seize the sting of the take and drag it to the specified size. You can even use the “Trim” software within the Observe menu.
When adjusting the take size, there are some things to bear in mind:
- The size of the take have to be throughout the vary of the unique recording. You may’t lengthen a take past its authentic finish level, however you possibly can trim it to any level inside its period.
- The size of the take will have an effect on its pitch and velocity. Should you trim a take, its pitch will improve, and its velocity will lower. Conversely, if you happen to lengthen a take, its pitch will lower, and its velocity will improve.
- The size of the take will be adjusted to match the size of one other take. That is helpful for creating seamless transitions between takes.
| Take Size | Pitch | Pace |
|---|---|---|
| Longer | Decrease | Slower |
| Shorter | Larger | Quicker |
Trimming Takes
To trim the chosen take, go to the Take menu and choose “Trim Take”. Alternatively, you should use the keyboard shortcut “Alt + T” (Home windows) or “Possibility + T” (Mac).
Within the “Trim Take” dialog, you possibly can specify the brand new begin and finish factors for the take. You can even use the mouse to pull the sides of the take to trim it.
Superior Trimming
| Motion | Keyboard Shortcut |
|---|---|
| Trim to the left of the cursor | Ctrl + Shift + [ (Windows) / Cmd + Shift + [ (Mac) |
| Trim to the right of the cursor | Ctrl + Shift + ] (Home windows) / Cmd + Shift + ] (Mac) |
| Trim to the beginning of the choice | Ctrl + Shift + Dwelling (Home windows) / Cmd + Shift + Dwelling (Mac) |
| Trim to the top of the choice | Ctrl + Shift + Finish (Home windows) / Cmd + Shift + Finish (Mac) |
These shortcuts mean you can shortly trim takes with out having to open the “Trim Take” dialog.
Deleting Takes
To delete takes, right-click on the take and choose “Delete”. You can even choose a number of takes and delete them unexpectedly. To do that, maintain down the Shift key and click on on the takes you wish to delete. Then, right-click and choose “Delete”.
If you wish to delete all the takes in a monitor, you are able to do this by choosing the monitor and urgent the “Delete” key. It will delete all the takes within the monitor, together with the chosen take.
You can even delete takes by utilizing the “Delete Take” command within the “Edit” menu. To do that, choose the take you wish to delete and go to the “Edit” menu. Then, choose “Delete Take”.
While you delete a take, it’s moved to the Recycle Bin. You may recuperate deleted takes from the Recycle Bin by going to the “File” menu and choosing “Recuperate Deleted Takes”.
Normalizing Takes
In Reaper, normalizing takes entails adjusting them to a constant quantity degree to make comparability and enhancing simpler. Comply with these steps:
- Choose the takes you wish to normalize.
- Proper-click and choose “Take Actions” > “Normalize Takes.”
- Within the “Normalize Takes” window, specify the goal normalization degree (in dB) or choose “Set to Max Quantity.”
- Select an interpolation mode to easy out any abrupt quantity adjustments.
- Allow “Clip Shield” to stop the normalized takes from clipping.
- Click on “OK” to use the normalization.
Desk of Normalization Choices
| Possibility | Description |
|---|---|
| Normalize to Peak | Adjusts the takes so their loudest level is on the specified goal degree. |
| Normalize to RMS | Adjusts the takes to have the identical common loudness. |
| Set to Max Quantity | Boosts the takes to the utmost potential degree with out clipping. |
Saving and Renaming the Comp
Now that you’ve created a comp, it can save you it for later use. To do that, right-click the comp within the Take Lanes panel and choose “Save Comp”. You may be prompted to enter a reputation for the comp. After you have entered a reputation, click on “Save”.
You may rename a comp at any time by right-clicking the comp within the Take Lanes panel and choosing “Rename Comp”. Enter the brand new identify for the comp and click on “OK”.
You can even create a brand new comp from a collection of takes. To do that, choose the takes you wish to embrace within the comp and right-click. Choose “Create Comp from Choice”.
After you have created a comp, you possibly can preview it by clicking the “Preview” button within the Take Lanes panel. The chosen take shall be performed again.
To pick out a take from the comp, click on on the take within the Take Lanes panel. The chosen take shall be highlighted in blue.
You may play the chosen take by clicking the “Play” button within the Take Lanes panel.
You can even delete a comp by right-clicking the comp within the Take Lanes panel and choosing “Delete Comp”.
Here’s a desk summarizing the steps for saving and renaming a comp:
| Step | Motion |
|---|---|
| 1 | Proper-click the comp within the Take Lanes panel. |
| 2 | Click on “Save Comp”. |
| 3 | Enter a reputation for the comp. |
| 4 | Click on “Save”. |
| 5 | Proper-click the comp within the Take Lanes panel. |
| 6 | Click on “Rename Comp”. |
| 7 | Enter the brand new identify for the comp. |
| 8 | Click on “OK”. |
| 9 | Choose the takes you wish to embrace within the comp. |
| 10 | Proper-click. |
| 11 | Click on “Create Comp from Choice”. |
| 12 | Click on the “Preview” button within the Take Lanes panel. |
| 13 | Click on on the take within the Take Lanes panel. |
| 14 | Click on the “Play” button within the Take Lanes panel. |
| 15 | Proper-click the comp within the Take Lanes panel. |
| 16 | Click on “Delete Comp”. |
Reaper 7 Comping Takes Play Chosen Take How To
Reaper 7 gives an intuitive and environment friendly technique to comp takes, permitting you to shortly and simply create the right efficiency from a number of recorded takes.
To play the chosen soak up Reaper 7, comply with these steps:
- File a number of takes of the identical monitor.
- Open the Take Browser by clicking the “Takes” button within the monitor header.
- Choose the take you wish to play from the Take Browser.
- Click on the “Play Chosen Take” button within the Take Browser.
The chosen take will now be performed again. You may press the spacebar or click on the “Cease” button to cease playback.
Folks Additionally Ask About Reaper 7 Comping Takes Play Chosen Take How To
How do I create a comp in Reaper 7?
To create a comp in Reaper 7, comply with these steps:
- Choose the takes you wish to embrace within the comp.
- Proper-click and choose “Comp Chosen Takes” from the menu.
- The brand new comp shall be created and added to the monitor.
How do I edit a comp in Reaper 7?
To edit a comp in Reaper 7, open the Take Browser and choose the comp you wish to edit. You may then use the Take Editor to regulate the timing and quantity of the person takes within the comp.
How do I delete a comp in Reaper 7?
To delete a comp in Reaper 7, choose the comp within the Take Browser and press the “Delete” key. The comp shall be faraway from the monitor.
