The of entirety on any quilt is the binding. It not solely offers the quilt a cultured look, however it additionally helps to guard the sides from fraying. Binding a quilt could be a daunting process, however it’s truly fairly easy with the suitable provides and just a little little bit of endurance. On this article, we’ll present you the way to connect binding to a quilt, step-by-step.
Earlier than you start, you will have to collect your provides. You have to:
• A quilt
• Binding material
• Bias tape maker or bias tape
• Cloth glue
• Scissors
• Iron and ironing board
After getting gathered your provides, you’re prepared to start. Step one is to chop your binding material. The width of your binding will rely upon the thickness of your quilt. For a quilt that’s 1/4 inch thick, you will have to chop your binding material 2 1/2 inches vast. For a quilt that’s 1/2 inch thick, you will have to chop your binding material 3 inches vast. After getting minimize your binding material, you will have to fold it in half lengthwise and press it with an iron.
Gathering the Crucial Supplies
Assembling the supplies required for quilt binding is crucial to begin the method effectively. Here is a complete listing of things to collect:
Binding Cloth:
1. Select a cloth that enhances the quilt’s general design and coloration scheme.
2. Decide the required yardage primarily based on the quilt’s perimeter and the specified binding width (sometimes 2-3 inches). A normal rule of thumb is so as to add 10 inches to the perimeter for becoming a member of and shrinkage.
Notions:
1. Thread: Choose a thread that matches the binding material or the quilt backing.
2. Binding Clips or Security Pins: These are used to briefly safe the binding to the quilt whereas stitching.
3. Measuring Tape or Ruler: For exact slicing and measuring.
4. Iron and Ironing Board: For urgent the binding and seams.
Attaching the Bias Binding by Machine
Attaching bias binding is a well-liked approach to end the sides of a quilt. However it may be a frightening process for inexperienced persons. Listed below are some recommendations on the way to do it by machine.
Supplies:
| Merchandise | Amount |
|---|---|
| Bias binding | Sufficient to go across the perimeter of the quilt plus 12 inches |
| Matching thread | 1 spool |
| Stitching machine | 1 |
| Presser foot | 1 for bias binding |
Step 1: Put together the Bias Binding
First, you could put together the bias binding. Fold the bias binding in half lengthwise, fallacious sides collectively. Press the fold flat.
Step 2: Connect the Bias Binding
Subsequent, you could connect the bias binding to the quilt. Begin by pinning the bias binding to the quilt, proper sides collectively. The uncooked fringe of the bias binding must be aligned with the uncooked fringe of the quilt.
Step 3: Sew the Bias Binding
Now you’re prepared to stitch the bias binding. Use a bias binding presser foot that will help you sew the bias binding evenly. Begin stitching at one nook of the quilt. Sew all the way in which across the quilt, stopping at the place to begin.
Ideas:
- Use a small sew size to make sure that the bias binding is securely hooked up to the quilt.
- Watch out to not stretch the bias binding as you sew. This can trigger the binding to pucker.
- In the event you make a mistake, do not panic. Merely unpick the stitches and begin once more.
After getting sewn the bias binding, your quilt will probably be completed. Bias binding is an effective way so as to add a contact of fashion to your quilt. It’s also a comparatively simple approach to study. With just a little observe, it is possible for you to to connect bias binding like a professional.
Attaching the Bias Binding by Hand
Earlier than you begin, ensure your quilt prime and backing are squared up and trimmed to the identical dimension. Additionally, you will want a size of bias binding that’s at the least twice the perimeter of your quilt plus 10 inches. Listed below are the steps:
1. Fold the bias binding in half
Fold the bias binding in half lengthwise, proper sides collectively. Press it flat.
2. Sew the bias binding to the quilt prime
Beginning on the middle of 1 facet of the quilt, pin the bias binding to the quilt prime, proper sides collectively. Sew it in place utilizing a 1/4-inch seam allowance. Trim the surplus bias binding from the corners.
3. Fold the bias binding over the sting of the quilt
Fold the bias binding over the sting of the quilt, enclosing the uncooked edge. Pin it in place. Sew it down utilizing a 1/4-inch seam allowance.
4. Miter the corners
To create a mitered nook, observe these steps:
- Cease stitching about 1 inch from the nook. Fold the bias binding again on itself, ensuring that the folded edge is even with the uncooked fringe of the quilt. Sew the bias binding in place, beginning about 1 inch from the nook and stitching to the nook.
- Fold the bias binding over the uncooked fringe of the quilt once more, ensuring that the folded edge is even with the uncooked fringe of the quilt. Sew the bias binding in place, beginning on the nook and stitching to the subsequent facet of the quilt.
- Trim any extra bias binding from the nook.
Repeat these steps for the remaining corners.
5. End the binding
Beginning on the middle of 1 facet of the quilt, hand-stitch the bias binding right down to the quilt backing utilizing a blind sew. Trim any extra bias binding from the corners.
Your quilt is now completed!
Mitering Bias Binding Corners
To miter bias binding corners, observe these steps:
- Mark the middle level of the bias binding that can prolong alongside the subsequent facet of the quilt.
- Mark some extent on the quilt that’s 2 inches from the nook.
- Fold the bias binding on the middle level after which unfold it.
- Align the fold with the marked level on the quilt, in order that the bias binding extends 1 inch on both facet of the nook.
- Pin the bias binding in place on the nook, being positive to miter the corners of the bias binding on the level the place they meet. To miter the corners, fold the bias binding in half on the nook and press. Unfold the bias binding and minimize off the surplus material on the nook. Then, refold the bias binding and press once more.
- Sew the bias binding in place alongside the sting of the quilt.
| Step | Description |
|---|---|
| 1 | Mark the middle level of the bias binding that can prolong alongside the subsequent facet of the quilt. |
| 2 | Mark some extent on the quilt that’s 2 inches from the nook. |
| 3 | Fold the bias binding on the middle level after which unfold it. |
| 4 | Align the fold with the marked level on the quilt, in order that the bias binding extends 1 inch on both facet of the nook. |
| 5 | Pin the bias binding in place on the nook, being positive to miter the corners of the bias binding on the level the place they meet. To miter the corners, fold the bias binding in half on the nook and press. Unfold the bias binding and minimize off the surplus material on the nook. Then, refold the bias binding and press once more. |
| 6 | Sew the bias binding in place alongside the sting of the quilt. |
Ending the Binding Ends
The ultimate step in attaching quilt binding is ending the free ends. This includes rigorously becoming a member of the start and ending edges of the binding, making a cohesive and completed look. Listed below are the detailed steps for ending the binding ends:
1. Overlapping the Binding Ends: Overlap the beginning and ending edges of the binding by roughly 2-3 inches. This overlap will present enough material to create a powerful and safe seam.
2. Trimming the Extra Binding: Trim the surplus binding material on the reverse finish to the overlap. Go away about 1/2 inch of material past the tip of the quilt.
3. Folding the Binding Edge: Fold the trimmed binding edge over the uncooked fringe of the quilt, aligning the folded edge with the seam line. Press the fold to create a pointy crease.
4. Mitering the Binding Corners: On the corners of the quilt, rigorously fold and miter the binding material to create a neat and exact end. This includes slicing diagonal slits into the binding material and folding it to suit snugly into the nook.
5. Stitching the Binding Ends: Utilizing a needle and thread, rigorously sew the overlapping binding ends collectively. Start by securing the seam with just a few stitches near the quilt. Proceed stitching alongside the seam line, utilizing small, even stitches.
6. Reinforcing the Binding Connection: To make sure a sturdy connection between the binding ends, think about reinforcing the seam utilizing one of many following strategies:
• Hand Sew: Overcast or blanket sew the seam by hand for added power and an ornamental contact.
• Machine Topstitch: Topstitch alongside the seam line utilizing a stitching machine to strengthen the connection and create an expert end.
• Nook Loops: Connect small loops of material or yarn to the corners of the binding, and tie them collectively to safe the ends.
Ideas for Ending Binding Ends
• Use a pointy needle and thread for precision and ease of stitching.
• Take your time and thoroughly align the binding ends earlier than stitching.
• Reinforce the binding connection to make sure sturdiness and longevity.
Including Optionally available Ornamental Particulars
As soon as the binding is hooked up, you may add non-obligatory ornamental particulars to boost the quilt’s look. Listed below are some concepts:
Appliqués
Appliqués are material designs which can be sewn onto the quilt prime. They’ll add a contact of caprice or class to the quilt. To appliqué, minimize out the specified design from material and stitch it onto the quilt prime utilizing a blind sew or different ornamental sew.
Embroidery
Embroidery is one other approach so as to add embellishment to a quilt. You’ll be able to embroider designs by hand or machine. Embroidery can be utilized to create borders, motifs, and even small scenes on the quilt.
Quilting
Quilting is the method of stitching by way of all three layers of the quilt (the highest, batting, and backing) to create a safe and ornamental end. Quilting will be performed by hand or machine. There are a lot of totally different quilting designs to select from, resembling straight traces, curves, and motifs.
Different Ornamental Particulars
Different ornamental particulars that may be added to a quilt embody:
| Ornament | Description |
|---|---|
| Beads | Small beads will be sewn onto the quilt for a contact of sparkle. |
| Buttons | Buttons will be sewn onto the quilt for a whimsical or classic look. |
| Lace | Lace will be added to the sides of the quilt for a fragile contact. |
| Ribbon | Ribbon can be utilized to create borders, appliqués, or different ornamental particulars. |
Troubleshooting Widespread Binding Points
Binding is just too free:
– The binding strip might not have been minimize vast sufficient.
– The binding might not have been stitched down securely sufficient.
– The quilt might have been washed and dried too continuously, inflicting the binding to turn out to be free.
Binding is just too tight:
– The binding strip might have been minimize too slim.
– The binding might have been stitched down too tightly.
– The quilt might have been washed and dried too continuously, inflicting the binding to shrink.
Binding just isn’t straight:
– The binding might not have been sewn on evenly.
– The quilt might have been shifted throughout the stitching course of.
– The binding might have been pressed incorrectly.
Binding is puckered:
– The binding might not have been stretched evenly throughout the stitching course of.
– The quilt might have been washed and dried too continuously, inflicting the binding to shrink.
– The binding might have been ironed too scorching.
Binding is fraying:
– The binding material might not have been sturdy sufficient.
– The binding might not have been stitched down securely sufficient.
– The quilt might have been washed and dried too continuously, inflicting the binding to fray.
Binding is coming off:
– The binding might not have been stitched down securely sufficient.
– The quilt might have been washed and dried too continuously, inflicting the binding to come back off.
– The binding might have been broken throughout the stitching course of.
Binding just isn’t laying flat:
– The binding might not have been pressed accurately.
– The quilt might have been washed and dried too continuously, inflicting the binding to shrink.
– The binding might have been sewn on inconsistently.
Binding is just too cumbersome:
– The binding strip might have been minimize too vast.
– The binding might have been folded over too many instances.
– The binding might have been stitched down too tightly.
Laundering and Caring for Certain Quilts
To take care of the sweetness and longevity of your sure quilt, correct laundering and care are important. Here is a complete information to make sure your quilt stays pristine:
Laundering
Machine Washing: Whereas most medium-sized quilts will be machine washed, it is advisable to make use of the mild cycle and chilly water. Keep away from utilizing bleach or harsh detergents.
Hand Washing: For delicate materials or massive quilts, hand washing is preferable. Submerge the quilt in a bath or massive sink stuffed with chilly water and gentle detergent, and gently agitate. Rinse completely.
Drying
Air Drying: Air drying is the most secure methodology for preserving the quilt’s form and coloration. Lay the quilt flat on a clear floor or line dry it outside.
Tumble Drying: If air drying just isn’t an possibility, tumble dry the quilt on low warmth, utilizing the fragile cycle. Keep away from overdrying, as this could injury the material.
Storage
To guard your quilt from mud and fading, retailer it in a cool, dry place. Think about using a breathable storage bag or quilt holder constructed from acid-free supplies.
Further Care Ideas
• Spot clear small stains utilizing a moist material and gentle detergent.
• Keep away from ironing instantly on the quilt. As an alternative, use a urgent material.
• If the quilt turns into closely dirty, think about taking it to an expert dry cleaner.
| Quilt Dimension | Washing Methodology |
|---|---|
| Small to Medium | Machine Wash (Light Cycle, Chilly Water) |
| Massive | Hand Wash |
| Delicate Materials | Hand Wash |
Keep in mind, these tips might differ barely relying on the precise materials and strategies utilized in your quilt. All the time discuss with the producer’s directions for particular care suggestions.
Supplies You may Want:
– Binding strips
– Matching thread
– Stitching machine
– Iron and ironing board
– Measuring tape or ruler
Directions:
1. Put together the Binding Strips:
Lower binding strips to be the specified width of your binding. Sew the strips collectively to type a single lengthy piece.
2. Connect the Binding to the Quilt:
Pin the binding across the fringe of the quilt, aligning the uncooked fringe of the binding with the uncooked fringe of the quilt prime.
3. Machine Sew the Binding:
Utilizing an identical thread, machine sew the binding to the quilt prime, 1/4 inch from the sting.
4. Fold the Binding Over the Edge:
Fold the binding over the sting of the quilt and hand-stitch or machine sew it in place, 1/4 inch from the folded edge.
5. Trim the Extra Binding:
Trim any extra binding from the corners and miter the corners for an expert end.
Ideas for a Skilled-Wanting End:
6. Use Bias Binding:
Bias binding stretches simply, making it simpler to use round curves and corners.
7. Machine Quilt the Binding:
Machine quilting the binding provides further power and sturdiness to the end.
8. Use a Number of Stitches:
Ornamental machine stitches can create a singular and personalised search for your quilt binding.
9. Hand-Sew the Corners:
Hand-stitching the corners permits for better precision and management.
10. Observe Makes Good:
The extra you observe, the higher your binding abilities will turn out to be. Do not be afraid to experiment with totally different strategies to search out what works greatest for you.
How To Connect Binding To A Quilt
Binding is a strip of material that’s sewn across the edges of a quilt to complete it off. It may be constructed from any kind of material, however it’s normally constructed from a coordinating material that matches the quilt prime. Binding will be hooked up by hand or by machine. There are two strategies for attaching binding to a quilt: the normal methodology and the trendy methodology.
Conventional Methodology
- Lower strips of material for the binding. The strips must be 2 1/4 inches vast and lengthy sufficient to go across the total perimeter of the quilt.
- Be a part of the strips of material collectively by stitching them collectively end-to-end.
- Fold the binding in half lengthwise, fallacious sides collectively.
- Pin the binding to the sting of the quilt, uncooked edges aligned.
- Sew the binding to the quilt utilizing a blind sew.
Fashionable Methodology
- Lower strips of material for the binding. The strips must be 2 1/4 inches vast and lengthy sufficient to go across the total perimeter of the quilt.
- Be a part of the strips of material collectively by stitching them collectively end-to-end.
- Fold the binding in half lengthwise, fallacious sides collectively.
- Pin the binding to the sting of the quilt, uncooked edges aligned.
- Sew the binding to the quilt utilizing a machine sew.
Individuals Additionally Ask
What’s the easiest way to connect binding to a quilt?
The easiest way to connect binding to a quilt depends upon your private desire. The normal methodology is extra time-consuming, however it produces a extra polished end. The fashionable methodology is quicker, however it may be tougher to get a clear end.
What sort of material ought to I exploit for binding?
You should use any kind of material for binding, however it’s normally constructed from a coordinating material that matches the quilt prime. Some fashionable materials for binding embody cotton, linen, and silk.
How vast ought to the binding be?
The binding must be 2 1/4 inches vast. This offers you a completed binding that’s 1 inch vast.
How lengthy ought to the binding be?
The binding must be lengthy sufficient to go across the total perimeter of the quilt. To find out the size of the binding, measure the perimeter of the quilt and add 10 inches. This offers you sufficient binding to overlap the ends and stitch them collectively.
