Changing the speedometer gentle bulb in a 2013 Honda Accord is a comparatively simple process that may be accomplished in below an hour. By following the steps outlined under, it can save you your self the time and expense of taking your automotive to a mechanic. Earlier than you start, guarantee you may have the next instruments and supplies: a Phillips head screwdriver, a brand new speedometer gentle bulb, and a pair of needle-nose pliers.
To begin, find the instrument cluster panel, which is the panel that homes the speedometer, tachometer, and different gauges. Upon getting positioned the instrument cluster panel, take away the screws that maintain it in place utilizing the Phillips head screwdriver. Fastidiously pull the instrument cluster panel in the direction of you, being cautious to not harm the wires or connectors hooked up to it. As soon as the instrument cluster panel is eliminated, you will note the again of the speedometer. Find the speedometer gentle bulb, which is usually a small, spherical bulb with a single contact level. Use the needle-nose pliers to softly pull the outdated gentle bulb straight out of its socket. Watch out to not contact the glass of the brand new gentle bulb, because the oils out of your pores and skin could cause it to burn out prematurely.
Insert the brand new gentle bulb into the socket, guaranteeing that the contact level is aligned appropriately. Gently push the sunshine bulb into place till it clicks. Reattach the instrument cluster panel to the dashboard, guaranteeing that every one screws are tightened securely. Activate the headlights to check the brand new gentle bulb. If the bulb is working appropriately, you may have efficiently changed the speedometer gentle bulb in your 2013 Honda Accord.
Eradicating the Instrument Cluster Panel
1. **Find the screws holding the instrument cluster panel in place.** There are two screws positioned on the high of the panel and two screws positioned on the backside.
2. **Take away the screws.** As soon as the screws are eliminated, rigorously pry the panel off of the dashboard. It might be crucial to make use of a skinny, flat-head screwdriver to softly pry the panel off.
3. **Disconnect {the electrical} connectors on the again of the panel.** There are two electrical connectors on the again of the panel. One connector is for the speedometer and the opposite connector is for the odometer. Disconnect each connectors by urgent on the discharge tab and pulling the connector straight off of the panel.
4. **Take away the instrument cluster panel from the dashboard.** As soon as {the electrical} connectors are disconnected, the instrument cluster panel will be faraway from the dashboard.
5. **Lay the instrument cluster panel face down on a clear, delicate floor.** It will stop the panel from getting scratched or broken.
6. **Find the bulb that must be changed.** The bulb is positioned behind the speedometer. It’s a small, white bulb with a black base.
7. **Gently pry the bulb out of its socket.** Use a small, flat-head screwdriver to softly pry the bulb out of its socket.
8. **Insert the brand new bulb into the socket.** Ensure that the bulb is seated correctly within the socket.
9. **Reattach {the electrical} connectors to the again of the instrument cluster panel.** Plug the connectors again into the panel and make it possible for they’re safe.
10. **Reinstall the instrument cluster panel into the dashboard.** Fastidiously slide the panel again into place and safe it with the 4 screws.
11. **Check the speedometer gentle.** Activate the headlights and make it possible for the speedometer gentle is working correctly.
Eradicating the Burned-Out Bulb
1. Find the instrument cluster. It’s the panel instantly in entrance of the steering wheel that incorporates the speedometer, tachometer, and different gauges.
2. Fastidiously take away the instrument cluster from the dashboard. Seek the advice of your automobile’s proprietor’s guide for particular directions on how to do that, as the method might range relying on the mannequin.
3. Disconnect {the electrical} connectors from the again of the instrument cluster.
4. Take away the screws or clips that maintain the instrument cluster casing collectively. Fastidiously separate the casing halves to show the inner parts.
Accessing the Speedometer Bulb
- Find the speedometer bulb holder. It’s sometimes a small, plastic socket that holds the bulb in place.
- Use a needle-nose pliers or a flat-head screwdriver to softly squeeze the perimeters of the bulb holder and pull it out of the socket.
- Take away the burned-out bulb from the holder.
5. Substitute the burned-out bulb with a brand new one of many similar kind. Make sure you insert it appropriately into the socket, aligning the pins on the bulb with the corresponding holes within the socket.
| Alternative Bulb Specs |
|---|
| Bulb Sort: T5 wedge |
| Wattage: 1.2 watts |
| Coloration: Inexperienced |
6. Reassemble the instrument cluster casing and safe it with the screws or clips.
7. Reconnect {the electrical} connectors to the again of the instrument cluster.
8. Reinstall the instrument cluster into the dashboard.
9. Check the brand new bulb by turning on the headlights and checking if the speedometer is illuminated.
How To Change 2013 Honda Accord Speedometer Mild Bulb
Changing the speedometer gentle bulb in a 2013 Honda Accord is a comparatively easy process that may be accomplished in a couple of minutes. Listed here are the steps concerned:
- Collect the required instruments. You’ll need a Phillips head screwdriver and a brand new speedometer gentle bulb.
- Find the speedometer gentle bulb. The speedometer gentle bulb is positioned behind the instrument cluster. To entry the instrument cluster, you’ll need to take away the steering wheel shroud.
- Take away the steering wheel shroud. The steering wheel shroud is held in place by a couple of screws. As soon as the screws are eliminated, you’ll be able to pull the shroud off.
- Take away the instrument cluster. The instrument cluster is held in place by a couple of screws. As soon as the screws are eliminated, you’ll be able to pull the instrument cluster out.
- Substitute the speedometer gentle bulb. The speedometer gentle bulb is positioned on the again of the instrument cluster. To exchange the bulb, merely twist the outdated bulb out and insert the brand new bulb.
- Reinstall the instrument cluster. As soon as the brand new bulb is put in, you’ll be able to reinstall the instrument cluster. To do that, merely slide the instrument cluster again into place and tighten the screws.
- Reinstall the steering wheel shroud. As soon as the instrument cluster is reinstalled, you’ll be able to reinstall the steering wheel shroud. To do that, merely snap the shroud again into place.
Folks Additionally Ask About
How Do You Change 2013 Honda Accord Speedometer Mild Bulb?
To vary the speedometer gentle bulb in a 2013 Honda Accord, you’ll need to take away the steering wheel shroud and the instrument cluster. As soon as the instrument cluster is eliminated, you’ll be able to substitute the speedometer gentle bulb by twisting the outdated bulb out and inserting the brand new bulb.
How A lot Does It Price to Substitute Speedometer Mild Bulb 2013 Honda Accord?
The fee to exchange the speedometer gentle bulb in a 2013 Honda Accord will range relying on the make and mannequin of your automotive, in addition to the labor charges in your space. Nevertheless, you’ll be able to count on to pay between $20 and $50 for the alternative.
The place Is Speedometer Mild Bulb Situated 2013 Honda Accord?
The speedometer gentle bulb in a 2013 Honda Accord is positioned behind the instrument cluster. To entry the instrument cluster, you’ll need to take away the steering wheel shroud.
How To Change 2013 Honda Accord Speedometer Mild Bulb?
To vary the speedometer gentle bulb in a 2013 Honda Accord, you’ll need to take away the steering wheel shroud and the instrument cluster. As soon as the instrument cluster is eliminated, you’ll be able to substitute the speedometer gentle bulb by twisting the outdated bulb out and inserting the brand new bulb.
