Should you’re the proud proprietor of a Fossil watch, you already know that it is a trendy and dependable timepiece. However even one of the best watches want slightly TLC sometimes, and one of the essential upkeep duties is changing the battery. Whereas it could look like a frightening job, altering a Fossil watch battery is definitely fairly easy. With the best instruments and slightly endurance, you possibly can have your watch up and working once more very quickly.
Earlier than you start, it is essential to assemble the required instruments. You may want a small Phillips head screwdriver, a watch battery, and a comfortable fabric. After you have your instruments, you can begin by eradicating the again of the watch. To do that, merely unscrew the 4 screws which might be positioned across the perimeter of the again. As soon as the screws are eliminated, you possibly can gently pry the again off of the watch. Watch out to not injury the watch or the gasket that seals the again in place.
With the again of the watch eliminated, you may now have entry to the battery. The battery is usually held in place by a small metallic clip. To take away the battery, merely use your screwdriver to softly pry the clip away from the battery. As soon as the clip is eliminated, you possibly can carry the battery out of the watch. Watch out to not contact the battery together with your fingers, as this will injury it. As soon as the previous battery is eliminated, you possibly can insert the brand new battery into the watch. Guarantee that the constructive (+) aspect of the battery is going through up. Then, use your screwdriver to softly pry the metallic clip again into place. Lastly, screw the again of the watch again on and also you’re all set!
Determine the Battery Sort
Earlier than changing your Fossil watch battery, it is essential to find out the right battery sort. This data is usually engraved on the again of the watch or contained in the battery compartment. If it is not seen, this is a step-by-step information that will help you determine the battery sort:
1. Open the Battery Compartment
Pry open the battery compartment utilizing a small screwdriver or a key. The compartment is often positioned on the again or aspect of the watch, and it could have a screw or a snap-on design.
Suggestions for Opening the Battery Compartment:
- Use the suitable software to keep away from damaging the watch.
- If the compartment is screwed, flip the screw counterclockwise to loosen it.
- If the compartment is snapped on, gently pry it open utilizing a skinny object.
2. Look at the Battery
As soon as the compartment is open, take away the previous battery. Fastidiously study the battery for any markings or engravings that point out its sort.
Widespread Battery Sorts Utilized in Fossil Watches:
| Battery Sort | Engraving/Markings |
|---|---|
| CR2032 | CR2032, DL2032, ECR2032 |
| CR2025 | CR2025, DL2025, ECR2025 |
| SR626SW | SR626SW, 377, 260, SR62 |
Observe: Should you can’t discover any markings on the battery, seek advice from your watch’s consumer handbook or seek the advice of an expert watchmaker.
Take away the Previous Battery
To take away the previous battery, observe these detailed steps:
- **Put together your instruments:** Collect a small flathead screwdriver, a pair of tweezers, and a brand new watch battery (CR2430 for many Fossil watches).
- **Find the battery compartment:** On the again of the watch, you may see a small compartment cowl held in place by screws.
- **Take away the quilt screws:** Utilizing the flathead screwdriver, rigorously take away the 2 small screws that maintain the quilt.
- **Open the compartment:** As soon as the screws are eliminated, gently pry open the battery compartment cowl utilizing the tweezers or your fingernail.
- **Securely take away the previous battery:** Find the previous battery, usually held in place by a small spring. Use the tweezers to softly carry the battery out. Don’t use your fingers, as pores and skin oils can injury the battery.
| Software | Function |
|---|---|
| Flathead Screwdriver | Take away battery compartment screws |
| Tweezers | Take away previous battery |
| New Watch Battery (CR2430) | Change previous battery |
Battery Is Useless
In case your Fossil watch’s battery is useless, you may want to exchange it. This is how:
- Take away the watchband by urgent the spring bars on both aspect of the watch case.
- Flip the watch over and take away the again cowl by unscrewing the screws that maintain it in place.
- Find the battery and take away it by gently prying it out with a small screwdriver or your fingernail.
- Insert the brand new battery into the watch, ensuring that the constructive (+) and damaging (-) terminals are going through the right means.
- Change the again cowl and screw it again into place.
- Change the watchband by sliding the spring bars again into place.
Palms Are Not Aligned
If the fingers of your Fossil watch aren’t aligned, you possibly can alter them by following these steps:
- Take away the watchband as described in step 1 of the earlier part.
- Flip the watch over and take away the again cowl as described in step 2 of the earlier part.
- Find the small adjustment screw on the again of the watch motion and switch it gently with a small screwdriver till the fingers are aligned appropriately.
- Change the again cowl and screw it again into place.
- Change the watchband.
Watch Is Not Conserving Time
In case your Fossil watch just isn’t retaining time, it could be an indication that the battery is nearing the top of its life or the motion must be serviced. You possibly can strive changing the battery, but when that doesn’t remedy the issue, you need to have the watch serviced by a professional watchmaker.
Troubleshooting Widespread Points
Battery Is Draining Too Rapidly
There are some things that may trigger your Fossil watch’s battery to empty too rapidly. These embody:
- Utilizing the backlight often
- Enabling Bluetooth or different wi-fi options
- Utilizing the chronograph characteristic often
To increase the lifetime of your battery, attempt to keep away from utilizing these options excessively.
Watch Is Not Waterproof
Fossil watches are waterproof to totally different depths, however they don’t seem to be waterproof. Which means that you shouldn’t swim or bathe together with your watch on. In case your watch will get moist, dry it off instantly with a comfortable fabric.
Watch Band Is Too Free or Too Tight
In case your Fossil watch band is just too unfastened, it could fall off your wrist. Whether it is too tight, it could be uncomfortable to put on. To regulate the band, observe these steps:
- Take away the watchband as described in step 1 of the primary part.
- Find the small adjustment holes on the underside of the band and use a small screwdriver or your fingernail to maneuver the pins into the specified holes.
- Change the watchband.
Watch Glass Is Scratched
If the glass in your Fossil watch is scratched, you possibly can attempt to take away the scratches utilizing a comfortable fabric and a small quantity of toothpaste. Rub the toothpaste gently in a round movement till the scratches are eliminated. Rinse the watch totally with water and dry it with a comfortable fabric.
Watch Case Is Dented or Scratched
If the case of your Fossil watch is dented or scratched, you possibly can attempt to take away the dents or scratches utilizing a comfortable fabric and a small quantity of metallic polish. Rub the polish gently in a round movement till the dents or scratches are eliminated. Rinse the watch totally with water and dry it with a comfortable fabric.
Watch Motion Is Not Working
If the motion of your Fossil watch just isn’t working, it could be an indication that the watch must be serviced. It’s best to have the watch serviced by a professional watchmaker.
How To Change Fossil Watch Battery
Altering the battery in a Fossil watch is a comparatively easy course of that may be accomplished at residence with a couple of primary instruments. Listed below are the steps on methods to change a Fossil watch battery:
1. Collect your instruments. You have to a small Phillips head screwdriver, a watch battery, and a lint-free fabric.
2. Open the watch again. Use the screwdriver to take away the 4 screws that maintain the watch again in place. Watch out to not strip the screws.
3. Take away the previous battery. Use the lint-free fabric to softly pry the previous battery out of the watch. Watch out to not injury the watch motion.
4. Insert the brand new battery. Align the constructive (+) terminal of the brand new battery with the constructive (+) terminal on the watch motion. Gently press the battery into place.
5. Shut the watch again. Change the watch again and tighten the screws. Make sure to tighten the screws evenly in order that the watch again is safe.
6. Take a look at the watch. As soon as the watch again is closed, press the button to begin the watch. The watch ought to begin working instantly.
Individuals Additionally Ask About How To Change Fossil Watch Battery
How usually ought to I modify the battery in my Fossil watch?
The battery in a Fossil watch ought to be modified each 2-3 years or when the watch begins to lose time. This can be sure that your watch continues to run precisely.
Can I modify the battery in my Fossil watch myself?
Sure, you possibly can change the battery in your Fossil watch your self with a couple of primary instruments. Observe the steps outlined above to vary the battery safely and simply.
How a lot does it price to vary the battery in a Fossil watch?
The associated fee to vary the battery in a Fossil watch will differ relying on the kind of watch and the jeweler you are taking it to. Nevertheless, you possibly can count on to pay between $10 and $20 for a battery change.
