How To Disassemble A 1911

by

Instruments and Preparation

Instruments required:

  • Punch Set: A punch set is a set of instruments used to drive out pins from the 1911. It usually contains punches of assorted styles and sizes.
  • Screwdriver: A flat-head screwdriver is required to take away the grip screws.
  • Allen Wrench: An Allen wrench is used to take away the grip security and the journal launch.
  • Hammer: A small hammer is used to faucet out the pins.
  • Cleansing Rod: A cleansing rod is used to push out the slide cease pin.

Preparation:

Earlier than disassembling the 1911, make sure that it’s unloaded and the journal is eliminated. Examine the chamber to confirm that it’s empty.

Discover a clear and well-lit workspace. Unfold out a towel or fabric to guard the elements from scratches.

Collect all the mandatory instruments. Arrange them inside simple attain to keep away from interruptions through the disassembly course of.

Security Precautions:

  • At all times put on security glasses when utilizing instruments.
  • Watch out to not lose any elements throughout disassembly.
  • Should you encounter any issue, check with a professional gunsmith.

    • Eradicating the Barrel

    1. **Depress the Slide Cease:** Utilizing your thumb or a instrument, press down on the slide cease lever, which is situated on the left aspect of the body, simply above the set off. This can enable the slide to maneuver again barely.

    2. **Retract the Slide:** Use your different hand to grip the slide serrations and pull the slide again till it stops. The slide ought to solely be moved again far sufficient to totally disengage the barrel from the slide.

    3. **Raise the Barrel Hyperlink:** The barrel hyperlink is a small, spring-loaded pin that connects the barrel to the slide. Use your thumb or a instrument to elevate the barrel hyperlink up and out of its slot within the slide.

    4. **Twist and Take away the Barrel:** As soon as the barrel hyperlink is lifted, the barrel could be simply faraway from the slide. Grip the barrel along with your fingers and gently twist it clockwise or counterclockwise. This can loosen the barrel from the slide, permitting you to drag it straight out. Be aware that the barrel is seated inside the slide’s barrel hood and must be tilted barely to exit the hood throughout elimination.

    Twist Path 1911 Mannequin
    Clockwise USGI, Colt, Sig
    Counterclockwise Springfield Armory

    5. **Examine and Clear:** As soon as the barrel is eliminated, take a while to examine it for any indicators of wear and tear, injury, or fouling. Clear the barrel and slide utilizing an acceptable cleansing solvent and lubricant to take away any particles or extra oil.

    Cleansing and Inspecting the Elements

    As soon as the 1911 is disassembled, it is necessary to totally clear and examine every half earlier than reassembly. This can assist guarantee correct functioning and longevity of the firearm.

    Cleansing

    Use a devoted gun cleansing solvent and fabric to take away any dust, particles, or fouling from the elements. Take note of the firing pin, extractor, and ejector as these areas are vulnerable to accumulate residue. Keep away from utilizing harsh chemical compounds or abrasive cleaners which will injury the elements.

    Inspecting

    Fastidiously study every half for any indicators of wear and tear, injury, or deformation. Examine for any cracks, scratches, rust, or corrosion. If any points are discovered, substitute the affected half promptly to forestall malfunctions or security hazards.

    Detailed Inspection of Elements
    Half Inspection Factors
    Slide Examine for cracks or deformation, easy motion of the slide on the body
    Barrel Examine the bore for obstructions, rust, or pitting, test the rifling for put on
    Body Look at for cracks or warpage, confirm correct match with the slide and different parts
    Extractor Examine for injury or put on on the claw, guarantee it strikes freely
    Ejector Examine for any injury or deformation, confirm correct spring rigidity

    Reassembling the Body

    1. Stand the body upright, holding it by the bottom of the grip.
    2. Insert the slide into the body. It should start to interact the rails and start to maneuver ahead.
    3. Tilt the slide barely down within the entrance.
    4. Push the slide ahead onto the body till the takedown notch is engaged and contours up with the slide cease pin.
    5. Insert the slide cease pin by way of the body from proper to left.
    6. Rotate the slide cease lever up.
    7. Insert the mainspring housing. The opening within the mainspring might want to line up with the outlet within the base of the body. This will take some wiggling and stress to interact.

    7.1. Holding the mainspring housing the wrong way up, interact the outlet that’s about 1/2″ from the highest (muzzle finish) of the housing with the cross pin.

    7.2. Rotate the mainspring housing upward as you information the cross pin into the oblong gap within the base of the body.

    7.3. Flip the mainspring housing over in order that the mainspring is now pointed down.

    7.4. Push the mainspring housing onto the body till the leg of the mainspring housing is engaged within the gap within the base of the body.

    8. Insert the journal launch by way of the body from left to proper.
    9. Insert the journal catch spring into the body.
    10. Insert the journal catch follower into the body.
    11. Insert the journal catch into the body.
    12. Insert the grip security into the body from proper to left.
    13. Insert the thumb security into the body from proper to left.
    14. Insert the firing pin cease into the body from proper to left.
    15. Insert the firing pin into the slide.

    Reassembling the Slide

    Reassembling the slide in your 1911 entails the next steps:

    1. Insert the Slide Launch Lever

    Insert the slide launch lever into its slot on the left aspect of the body.

    2. Set up the Grip Security

    Insert the grip security into its slot within the backside of the body. Push it upward till it clicks into place.

    3. Set up the Hammer Strut

    Insert the hammer strut into its slot within the sear spring housing. Push it down till it clicks into place.

    4. Set up the Slide Cease

    Insert the slide cease into its slot in the correct aspect of the body. Push it in till it engages with the slide.

    5. Place the Recoil Spring and Slide

    Place the recoil spring meeting over the barrel. Place the slide over the spring and barrel, aligning the slide cease pin with the slide cease.

    6. Insert the Barrel

    Insert the barrel into the slide. Push it in till it slides towards the slide cease.

    7. Insert the Recoil Spring Plug

    Insert the recoil spring plug into the tip of the recoil spring meeting.

    8. Have interaction the Slide Cease and Recoil Spring Plug

    Slide Cease Engaged Recoil Spring Plug Engaged
    Slide Stop Engaged Recoil Spring Plug Engaged

    Insert the slide cease pin again into its slot within the body. Push within the recoil spring plug till it engages with the slide cease.

    9. Examine the Slide Operate

    Rack the slide to make sure it strikes easily and locks securely in place.

    Putting in the Barrel

    Now that the slide is off, you’ll be able to set up the barrel. To do that, first, insert the barrel into the slide, ensuring that the lug on the underside of the barrel suits into the corresponding slot within the slide.

    Subsequent, push the barrel till it’s about midway into the slide. Then, rotate the barrel in order that the lug on the highest of the barrel suits into the corresponding slot within the slide.

    Lastly, push the barrel all the way in which into the slide, ensuring that it’s absolutely seated. As soon as the barrel is put in, substitute the slide onto the body and reassemble the pistol.

    The best way to Disassemble a 1911

    Disassembling a 1911 pistol is a comparatively easy course of that may be accomplished in a couple of minutes. Nevertheless, you will need to observe the steps fastidiously to keep away from damaging the firearm.

    To disassemble a 1911, you’ll need the next instruments:

    • A 1911 disassembly instrument (non-compulsory)
    • A small Allen key (non-compulsory)
    • A flat-head screwdriver (non-compulsory)

    After you have gathered the mandatory instruments, you’ll be able to start the disassembly course of. Observe these steps:

    1.

    Take away the journal from the pistol and confirm that the chamber is empty.

    2.

    Decrease the hammer by pulling the set off.

    3.

    Insert the disassembly instrument (or Allen key) into the outlet within the rear of the slide and push the slide cease pin out to the correct.

    4.

    Pull the slide again and off of the body.

    5.

    Raise the barrel out of the slide.

    6.

    Take away the recoil spring and information rod from the barrel.

    7.

    Separate the body and the mainspring housing.

    8.

    Take away the sear spring from the body.

    9.

    Take away the hammer strut from the body.

    10.

    Take away the hammer from the body.

    11.

    Take away the set off from the body.

    12.

    Take away the sear from the body.

    13.

    Take away the grip security from the body.

    14.

    Take away the beavertail grip security (if outfitted).

    Your 1911 pistol is now disassembled. To reassemble the pistol, merely reverse the steps above.

    Individuals Additionally Ask

    How do you discipline strip a 1911?

    To discipline strip a 1911, observe the steps outlined above.

    How do you take away the slide from a 1911?

    To take away the slide from a 1911, insert the disassembly instrument (or Allen key) into the outlet within the rear of the slide and push the slide cease pin out to the correct. Then, pull the slide again and off of the body.

    How do you take away the barrel from a 1911?

    To take away the barrel from a 1911, elevate the barrel out of the slide.

    How do you take away the recoil spring and information rod from a 1911?

    To take away the recoil spring and information rod from a 1911, take away the recoil spring plug from the underside of the barrel. Then, pull the recoil spring and information rod out of the barrel.

    Barrel Set up Steps
    Insert the barrel into the slide, ensuring that the lug on the underside of the barrel suits into the corresponding slot within the slide.
    Push the barrel till it’s about midway into the slide.
    Rotate the barrel in order that the lug on the highest of the barrel suits into the corresponding slot within the slide.
    Push the barrel all the way in which into the slide, ensuring that it’s absolutely seated.
    Exchange the slide onto the body and reassemble the pistol.