Are you going through difficulties in dismounting your DSLR C/Fd teleconverter? It is a frequent problem that many photographers encounter when working with teleconverter lenses. Whether or not you are an expert photographer or an enthusiastic hobbyist, realizing the right methods for eradicating a teleconverter is essential to keep away from damaging your helpful tools. On this complete information, we’ll present step-by-step directions on learn how to safely dismount a C/Fd teleconverter out of your DSLR digicam.
Earlier than we dive into the dismounting course of, it is necessary to know why teleconverters are utilized in images. A teleconverter is an optical system that matches between a digicam physique and a lens, successfully rising the focal size of the lens. This enables photographers to realize larger magnification with out the necessity for a bigger or dearer lens. Nonetheless, when it comes time to take away the teleconverter, it is important to method the duty with warning and observe the right procedures.
Step one in dismounting a C/Fd teleconverter is to make sure that the digicam is powered off and the lens is indifferent from the physique. Find the locking ring on the teleconverter, which is often positioned close to the mount. Rigorously flip the locking ring counterclockwise to loosen it, however don’t take away it fully. Firmly grip the teleconverter and gently pull it straight backward, away from the digicam physique. Keep away from twisting or making use of extreme power, as this might injury both the teleconverter or the digicam mount. As soon as the teleconverter is indifferent, you’ll be able to take away the locking ring and retailer the teleconverter and lens individually till you want them once more.
Preparation
Earlier than you start the dismounting course of, it is very important guarantee that you’ve got all the required instruments and supplies. Here’s a detailed record of what you have to:
- Digital camera physique
- C/Fd teleconverter
- Lens cleansing material
- Small screwdriver (elective)
After you have gathered all the required instruments and supplies, you’ll be able to start the dismounting course of. Make sure to take your time and observe the steps rigorously to keep away from damaging your tools.
Security Precautions
Earlier than you start, it is very important take some security precautions to keep away from damaging your tools or injuring your self. Right here are some things to remember:
- All the time guarantee that your digicam is turned off earlier than you start dismounting the teleconverter.
- Watch out to not drop the teleconverter or your digicam, as this might injury the tools.
- Don’t use extreme power when dismounting the teleconverter, as this might injury the tools.
Security First
Earlier than dealing with any digicam tools, guarantee that it’s turned off and the lenses are eliminated.
Dismounting the C/Fd Teleconverter
To dismount the C/Fd teleconverter, observe these steps:
- Unfold the rear lens cap.
- Grip the teleconverter firmly with one hand and the digicam physique with the opposite hand.
- Whereas holding the digicam and teleconverter regular, press the lens launch button on the digicam physique and concurrently rotate the teleconverter counterclockwise till it stops.
- Carry the teleconverter straight up and away from the digicam physique.
Here’s a desk summarizing the steps:
| Step | Motion |
|---|---|
| 1 | Unfold the rear lens cap. |
| 2 | Grip the teleconverter and digicam physique firmly. |
| 3 | Press the lens launch button and rotate the teleconverter counterclockwise. |
| 4 | Carry the teleconverter straight up and away from the digicam physique. |
Lens Elimination
1. **Take away the lens cap.** Maintain the lens cap in a single hand and the lens within the different hand. Gently pull the lens cap straight off the lens.
-
Maintain the lens firmly. Place one hand across the base of the lens, close to the digicam physique. Use your different hand to help the entrance of the lens.
-
Flip the lens counterclockwise. Whereas holding the lens firmly, flip the lens counterclockwise to detach it from the digicam physique. Make sure to use even stress and keep away from twisting the lens.
Listed below are some further suggestions for eradicating a lens:
- If the lens is caught, don’t power it. Gently wiggle the lens backwards and forwards whereas turning it counterclockwise.
- Watch out to not drop the lens. If the lens falls, it could possibly be broken.
- As soon as the lens is eliminated, retailer it in a secure place to stop injury.
Mount Rotation
The mount rotation function lets you rotate the teleconverter across the lens axis, which will be helpful for aligning the teleconverter’s optical axis with the lens’ optical axis. To rotate the mount, loosen the mount rotation screw utilizing the included Allen key. As soon as the screw is free, you’ll be able to rotate the teleconverter by hand. Tighten the screw as soon as the teleconverter is within the desired place.
Listed below are some suggestions for utilizing the mount rotation function:
- Use a tripod to stabilize the digicam and lens.
- Deal with a distant object.
- Rotate the teleconverter till the picture is sharp.
- Tighten the mount rotation screw to safe the teleconverter in place.
The mount rotation function will also be used to create particular results, reminiscent of swirling or panning.
| Teleconverter | Mount Rotation |
|---|---|
| Canon EF 1.4x III | Sure |
| Canon EF 2x III | Sure |
| Nikon AF-S TC-14E III | Sure |
| Nikon AF-S TC-17E II | Sure |
| Nikon AF-S TC-20E III | Sure |
Launch Button Location
The discharge button for a C/Fd teleconverter is often positioned on the facet of the teleconverter, close to the lens mount. It’s often a small, recessed button that you simply press to launch the teleconverter from the lens.
To launch the teleconverter, observe these steps:
1. Maintain the lens with one hand and the teleconverter with the opposite hand.
2. Press the discharge button on the facet of the teleconverter.
3. Pull the teleconverter straight out from the lens.
The teleconverter will now be launched from the lens and you’ll take away it. If you’re having hassle releasing the teleconverter, it’s possible you’ll want to use a bit of power. Nonetheless, watch out to not injury the lens or the teleconverter.
| Location | Description |
|---|---|
| Aspect of the teleconverter | Close to the lens mount |
| Small, recessed button | Press to launch the teleconverter |
Listed below are some further suggestions for releasing a C/Fd teleconverter:
- Guarantee that the lens and the teleconverter are correctly aligned earlier than trying to launch the teleconverter.
- If the discharge button is caught, you’ll be able to strive utilizing a small screwdriver to softly pry it open.
- Watch out to not injury the lens or the teleconverter when releasing it.
Detaching the Teleconverter
To detach the teleconverter out of your digicam, observe these steps:
- Find the Launch Button: On the facet of the teleconverter, there’s a small button labeled "Launch."
- Press the Launch Button: Press the discharge button gently to unlock the teleconverter from the digicam.
- Rotate the Teleconverter Counterclockwise: Whereas holding the discharge button pressed, rotate the teleconverter counterclockwise.
- Pull the Teleconverter Away: Proceed rotating the teleconverter till it’s absolutely indifferent from the digicam.
- Retailer the Teleconverter: Safely retailer the teleconverter in its protecting case or bag.
Eradicating the Teleconverter from the Lens
- Find the Mount Launch Button: On the teleconverter, there’s a smaller button labeled "Mount Launch."
- Press the Mount Launch Button: Press the Mount Launch button to unlock the teleconverter from the lens.
- Pull the Teleconverter Ahead: Gently pull the teleconverter ahead till it’s absolutely indifferent from the lens.
- Retailer the Teleconverter: Safely retailer the teleconverter in its protecting case or bag.
Notice: When detaching the teleconverter, deal with it with care to keep away from any injury to the lens or digicam.
Put up-Dismount Inspection
As soon as the teleconverter has been dismounted, carry out a post-dismount inspection to make sure that each the digicam and teleconverter are in correct working order and that no injury occurred through the course of.
7. Examine the Teleconverter Mount
Totally examine the teleconverter mount, paying specific consideration to the next:
- Any seen injury or put on, reminiscent of scratches, dents, or chips.
- Make sure that the contacts are clear and freed from any corrosion or particles.
- Confirm that the locking mechanism is functioning appropriately and that it securely holds the teleconverter in place.
If any injury is discovered through the inspection, it is strongly recommended to seek the advice of a professional digicam technician to evaluate the severity of the injury and decide the required repairs.
| Inspection Merchandise | Examine for: |
|---|---|
| Mount floor | Scratches, dents, chips |
| Contacts | Corrosion, particles |
| Locking mechanism | Correct functioning, safe maintain |
Dismounting the Teleconverter
Comply with these steps to soundly take away the teleconverter out of your digicam lens:
-
Flip off the digicam. All the time energy down your digicam earlier than dealing with any lenses or equipment.
-
Take away the lens cap. Shield your lens by eradicating the cap earlier than attaching or detaching the teleconverter.
-
Maintain the digicam lens regular. Help the lens with one hand to stop it from falling or inflicting injury.
-
depress the lens launch button. Find the button on the digicam physique or lens mount that releases the lens.
-
Rotate the teleconverter counterclockwise. Gently flip the teleconverter to the left to loosen its connection to the lens.
-
Pull the teleconverter straight off. As soon as loosened, rigorously pull the teleconverter straight in direction of you to detach it.
-
Retailer the teleconverter safely. Shield the teleconverter by storing it in a clear, dry place.
-
Clear the lens and teleconverter mounts. Take away any mud or particles from the lens and teleconverter mounts utilizing a smooth brush or material.
Reattaching the Teleconverter (Non-compulsory)
To reattach the teleconverter, observe the identical steps in reverse order:
-
Align the crimson dots. Make sure the alignment marks (often crimson dots) on the teleconverter and lens match up.
-
Insert the teleconverter. Gently slide the teleconverter onto the lens mount and align the crimson dots.
-
Rotate the teleconverter clockwise. Flip the teleconverter clockwise till it locks securely into place.
-
Safe the lens. Reattach the lens to the digicam physique by aligning the crimson dots and urgent down till it clicks.
-
Change the lens cap. Shield your lens by changing the cap after reattaching the teleconverter.
Vital Reminder:
-
Solely use suitable teleconverters designed to your particular digicam and lens.
-
Keep away from touching the glass surfaces of the teleconverter or lens.
-
Retailer your teleconverter in a dry, dust-free surroundings when not in use.
Storage and Upkeep
To make sure the longevity and optimum efficiency of your C/Fd teleconverter, correct storage and upkeep are essential. Listed below are some tips to observe:
Dealing with
Deal with the teleconverter with care, avoiding any sudden jolts or impacts. Use each fingers to help the digicam and lens when attaching or detaching the teleconverter.
Cleansing
Preserve the teleconverter clear by utilizing a smooth brush or material to softly take away any mud or particles. Keep away from utilizing harsh cleansing brokers or abrasive supplies that might injury the fragile optical surfaces.
Storage
Retailer the teleconverter in a dry and dust-free surroundings. Use a protecting case or bag to stop any scratches or injury throughout transportation. Keep away from exposing the teleconverter to excessive temperatures or humidity.
Upkeep
Periodically examine the teleconverter for any indicators of wear and tear or injury. If you happen to discover any points, seek the advice of a professional digicam technician for restore or upkeep.
Desk: Storage and Upkeep Guidelines
| Process | Frequency |
|---|---|
| Clear the teleconverter | As wanted |
| Examine the teleconverter for injury | Periodically |
| Retailer the teleconverter correctly | Indefinitely |
By adhering to those tips, you’ll be able to make sure that your C/Fd teleconverter stays in optimum situation and gives years of dependable service.
Troubleshooting Ideas
1. Guarantee Lens Compatibility
Verify that the teleconverter is designed to be used together with your particular lens mannequin. Compatibility points could cause difficulties in dismounting.
2. Examine Alignment
Align the white index dots on the lens and teleconverter appropriately earlier than trying to mount or dismount.
3. Apply Agency Strain
Press down firmly and evenly on the discharge button whereas rotating the teleconverter counterclockwise to disengage it.
4. Disengage the Lock
In case your lens has a lock mechanism, guarantee it’s disengaged earlier than trying to take away the teleconverter.
5. Clear Contacts
Soiled or obstructed electrical contacts can stop correct disengagement. Clear them gently with a smooth brush or material.
6. Rotate Gently
Keep away from making use of extreme power whereas rotating the teleconverter. Rotate it easily and steadily till it comes free.
7. Keep away from Twisting
Don’t twist or torque the teleconverter as you dismount it. This could injury the mounting mechanism.
8. Use a Comfortable Material
Shield the lens and teleconverter from scratches by utilizing a smooth material or lens paper to deal with them.
9. Examine for Obstructions
Look at the lens and teleconverter for any overseas objects or particles that will hinder dismounting.
10. Desk of Frequent Errors and Options
| Error | Resolution |
|---|---|
| Teleconverter will not budge | Guarantee correct alignment, apply agency stress, and clear contacts. |
| Teleconverter rotates however would not disengage | Examine for obstructions, disengage the lock, and rotate extra firmly. |
| Teleconverter comes free unintentionally | Tighten the discharge button extra securely and examine the locking mechanism. |
How To Dismount C/Fd Teleconverter
To dismount a C/FD teleconverter, observe these steps:
- Maintain the teleconverter firmly in a single hand and the lens within the different hand.
- Align the index marks on the teleconverter and the lens.
- Rotate the teleconverter counterclockwise till it stops.
- Pull the teleconverter straight off the lens.
If the teleconverter is caught, you’ll be able to strive utilizing a rubber band or a chunk of fabric to get a greater grip. You can even strive gently tapping the teleconverter with a hammer or different object to loosen it.
Individuals Additionally Ask
How do I take away a teleconverter from a Nikon lens?
To take away a teleconverter from a Nikon lens, observe these steps:
- Maintain the teleconverter firmly in a single hand and the lens within the different hand.
- Align the index marks on the teleconverter and the lens.
- Rotate the teleconverter counterclockwise till it stops.
- Pull the teleconverter straight off the lens.
What’s a C/FD teleconverter?
A C/FD teleconverter is a kind of lens adapter that’s used to extend the focal size of a lens. It’s usually used with SLR cameras.
