After hours of cautious piecing and stitching, the second has lastly arrived to finish your treasured quilt. The ultimate step, binding the quilt, gives the right of entirety and secures the layers collectively. Whereas this activity could appear daunting, it is truly fairly easy with a couple of easy-to-follow steps. This complete information will equip you with the data and strategies wanted to create a ravishing and sturdy binding that may improve the general aesthetic of your quilt.
Earlier than embarking on the binding course of, it is important to collect the required supplies. You will want a size of binding material that’s minimize on the bias, which gives the material with further flexibility and permits it to curve simply across the quilt. Moreover, you may want a needle, thread, and a pair of scissors. Upon getting all of the supplies assembled, you possibly can start the binding course of by attaching the binding to the quilt. This step entails stitching the binding to the quilt prime after which folding it over the uncooked edges and stitching it down. By following the directions fastidiously, you possibly can be certain that the binding is securely hooked up and gives a professional-looking end.
To finish the binding course of, you may want to hitch the 2 ends of the binding collectively. This may be achieved utilizing one in every of a number of strategies, such because the mitered nook technique or the continual binding technique. The mitered nook technique creates a pointy, angled nook, whereas the continual binding technique produces a extra rounded nook. Each strategies are efficient in securing the binding and including a contact of class to your quilt. As soon as you’ve got joined the 2 ends of the binding, you may must hand-stitch the binding in place. This closing step ensures that the binding is securely hooked up and gives a sturdy end that may stand up to years of use and delight.
Collect Needed Supplies
Earlier than you possibly can start the method of ending the binding in your quilt, you have to to collect the entire needed supplies. These embrace:
- Quilt
- Binding material
- Needle and thread
- Scissors
- Iron and ironing board
- Measuring tape
- Seam ripper
- Quilt batting (elective)
Binding Material
The binding material is the material that can be used to complete the sides of your quilt. It needs to be a light-weight material that’s straightforward to work with. You have to to buy sufficient binding material to go across the total perimeter of your quilt, plus a couple of further inches for overlap.
When deciding on a binding material, take into account the general appear and feel of your quilt. You might wish to select a material that enhances the colours and patterns in your quilt, or you might wish to select a contrasting material so as to add a contact of curiosity.
Here’s a desk of urged binding material widths for various quilt sizes:
| Quilt Dimension | Binding Material Width |
|---|---|
| Child | 2.5 inches |
| Throw | 3 inches |
| Twin | 3.5 inches |
| Full | 4 inches |
| Queen | 4.5 inches |
| King | 5 inches |
Decide Quilt Binding Size
To find out the size of binding wanted to your quilt, you may must measure the perimeter of the quilt prime. This is a step-by-step information:
- Measure the width of the quilt prime. Measure the gap from one uncooked edge to the opposite, alongside the highest and backside.
- Measure the size of the quilt prime. Measure the gap from one uncooked edge to the opposite alongside the perimeters.
- Add the width and size measurements. This offers you the whole perimeter of the quilt prime.
- Multiply the whole perimeter by 1.5. This permits for cloth wraps and shrinkage.
- The result’s the size of binding you want. Spherical as much as the closest yard or half-yard for comfort.
Instance:
In case your quilt prime measures 50 inches large and 60 inches lengthy, the calculations can be as follows:
| Measurement | Worth |
|---|---|
| Width of quilt prime | 50 inches |
| Size of quilt prime | 60 inches |
| Whole perimeter | 110 inches |
| Perimeter x 1.5 | 165 inches |
| Size of binding (rounded up) | 1.5 yards |
Pin Binding Strips Collectively
Upon getting minimize your binding strips, it is time to pin them collectively. It is a easy course of, however it’s essential to take your time and do it accurately. In case your binding strips will not be pinned collectively correctly, they won’t sew collectively easily and your quilt is not going to look its finest.
To pin your binding strips collectively, comply with these steps:
Step 1: Lay out your binding strips
Lay out your binding strips so as, with the precise sides collectively. Match up the ends of the strips fastidiously, ensuring that they’re aligned.
Step 2: Pin the binding strips collectively
Pin the binding strips collectively alongside the lengthy edge, utilizing a 1/4-inch seam allowance. Begin by pinning the middle of the strips collectively, then work your means out to the ends. Be sure that the pins are perpendicular to the sting of the material, and that they aren’t too shut collectively or too far aside. It’s best to have a pin each 2-3 inches.
Step 3: Press the seam
Upon getting pinned the binding strips collectively, press the seam allowance open utilizing a scorching iron. This may assist the binding to put flat when it’s sewn on.
| Tip | Description |
|---|---|
| Use a light-weight contact when urgent the seam. | An excessive amount of warmth can harm the material. |
| Press the seam allowance open all the best way to the sides of the material. | This may assist the binding to put flat. |
Sew Binding Strips right into a Steady Loop
To create a steady loop of binding strips, comply with these detailed steps:
1. **Put together the Binding Strips:**
- Iron the binding strips flat.
- Be a part of the strips with a diagonal seam, urgent the seam open.
2. **Create the Steady Loop:**
- Fold the joined binding strips in half lengthwise, with the incorrect sides collectively.
- Sew alongside the folded edge utilizing a slim seam allowance of 1/4 inch to three/8 inch.
- Flip the tube proper facet out and press it flat.
3. **Verify for Continuity:**
- Pull gently on each ends of the binding loop to make sure it’s steady and there are not any breaks.
- If there are any breaks, fastidiously sew the hole.
4. **Binding Traits:**
| Attribute | Description |
|---|---|
| Size | The binding loop needs to be barely longer than the perimeter of the quilt plus an additional 10-12 inches for overlap and becoming a member of. |
| Width | The width of the binding loop is determined by the specified completed look. The most typical widths are 2 1/4 inches, 2 1/2 inches, and a couple of 3/4 inches. |
| Material | The binding material ought to coordinate with the quilt however can be a contrasting colour or sample. |
Connect Binding to Quilt
As soon as the binding strips have been sewn collectively, it is time to connect them to the quilt. Start by aligning the uncooked fringe of the binding to the uncooked fringe of the quilt prime, with the precise sides collectively. The binding ought to overlap the quilt prime by about 1/4 to 1/2 inch.
Sew across the perimeter of the quilt, utilizing a small sew size (about 2.5 to three mm). It is essential to maintain the seam allowance constant, so use a seam information or stitch-in-the-ditch foot that can assist you.
As soon as you’ve got sewn across the quilt, cease about 4 inches from the place you began. Overlap the top of the binding by about 1 inch and stitch over the earlier seam. This may create a powerful and safe end.
Fold the binding over the uncooked fringe of the quilt again and press. Topstitch across the perimeter of the quilt, near the sting of the binding. This may safe the binding in place and provides the quilt a completed look.
Mitred Corners
For a extra professional-looking end, you possibly can mitre the corners of the binding. To do that, fold the binding at a 45-degree angle on the nook of the quilt. Press the crease. Unfold the binding and align the uncooked edges of the 2 items. Sew throughout the nook, utilizing a small sew size. Trim the surplus binding and fold it over the uncooked fringe of the quilt, as described above.
| Technique | Description |
|---|---|
| Straight Binding | The binding is hooked up to the quilt in a straight line, with none mitering. |
| Mitred Binding | The corners of the binding are mitered to create a extra professional-looking end. |
Machine Sew Round Perimeter
As soon as the binding is hooked up, it’s essential to sew across the perimeter to safe it in place. This is a step-by-step information:
1. Fold the Binding Over the Edge
Fold the binding over the uncooked fringe of the quilt, aligning the folded edge with the uncooked edge. Use a 1/4-inch seam allowance.
2. Pin the Binding
Pin the binding in place, beginning on the heart of 1 facet and dealing your means across the quilt. Place the pins perpendicular to the sting, about 2 inches aside.
3. Sew Across the Perimeter
Utilizing a stitching machine, sew across the perimeter of the quilt, near the folded fringe of the binding. Use a small sew size (1.5-2 mm) for a safe sew.
4. Backstitch at Beginning and Ending Factors
While you attain the place to begin, backstitch a couple of stitches to safe the thread. Repeat on the ending level.
5. Take away the Pins
As soon as you’ve got stitched across the perimeter, take away the pins.
6. Trim the Extra Binding
Trim any extra binding on the corners to stop bulk. To do that:
- Fold the binding again on itself at a 45-degree angle on the nook.
- Trim off the surplus binding, leaving about 1/4 inch of overlap.
- Unfold the binding and press it flat.
| Nook | Diagram |
|---|---|
| Inside Nook | [Diagram of an inside corner with binding trimmed and folded back] |
| Outdoors Nook | [Diagram of an outside corner with binding trimmed and folded back] |
Hand Sew Hidden Hem
Hand stitching a hidden hem is a fragile and exact technique that requires endurance and a focus to element. To realize a professional-looking end, comply with these steps:
- Fold and Press the Hem: Flip the uncooked fringe of the binding inward by about 1/4 inch and press it flat. Then, fold the binding over the uncooked edge once more by one other 1/4 inch and press it firmly.
- Thread Your Needle: Thread a pointy needle with a quilter’s thread that matches the binding material. Double the thread and knot the ends.
- Begin Stitching: Insert the needle into the binding, simply to the precise of the folded edge. Carry it out by the folded edge, about 1/16 inch above the primary sew.
- Invisible Stitches: Cross the needle again by the folded edge about 1/16 inch to the left of the primary sew. Carry it out by the binding, then insert it again into the binding 1/16 inch to the left of the second sew.
- Proceed Stitching: Repeat this sew sample alongside all the hem, holding the stitches even and invisible. The stitches ought to solely be seen from the again of the quilt.
- End the Hem: When you attain the top of the hem, safe the thread by tying it off with a double knot. Clip any extra thread near the binding.
- Hand-Sew Chart: For a visible information, confer with the next chart:
Sew Quantity Needle In Needle Out 1 Proper of folded edge 1/16 inch above first sew 2 1/16 inch left of first sew 1/16 inch left of second sew 3 1/16 inch left of second sew 1/16 inch left of third sew
Sq. Corners for a Skilled End
Creating completely sq. corners when binding a quilt requires precision and a focus to element. This is a step-by-step information to attain crisp, professional-looking outcomes:
1. Trim Corners
Trim the surplus batting and material from the quilt sandwich, leaving about 1/4 inch past the quilt edge.
2. Fold Binding Strips
Fold the binding strips in half lengthwise, urgent the crease firmly.
3. Pin Binding to the Quilt
Beginning at a straight edge, align the folded fringe of the binding strip with the quilt edge and safe it with pins. Go away a 10-12 inch tail and overlap the ends by 2-3 inches if you attain the place to begin.
4. Machine Sew Binding
Machine sew the binding in place, roughly 1/4 inch from the folded edge. Use an identical thread colour and sew in a straight line, pivoting on the corners.
5. Miter the Nook
As soon as you’ve got stitched to the primary nook, cease and elevate the presser foot. Carry the binding strip up and over the nook, and align the folded edge with the quilt edge. Proceed stitching.
6. Trim Extra
Trim the surplus binding material on the nook, leaving about 1/4 inch past the sew line.
7. Flip Nook
Fold the binding strip on the nook and press it flat. Use a pin to safe the folded edge to the quilt.
8. Ideas for Excellent Corners:
**a. Use a Template:** Think about using a 45-degree nook template to make sure accuracy when slicing and folding the mitered nook.
**b. Trim Again Extra:** After mitering the nook, trim away any extra binding material on the again of the quilt to cut back bulk.
**c. Endurance and Precision:** Take your time and deal with creating exact corners. It is value the additional effort for a professional-looking end.
Safe Corners with Miter Folds
Miter folds create a clear and crisp nook in your quilt binding. To make a miter fold:
Step 1: Fold the Binding Over the Nook
Carry the binding strip over the nook of the quilt, aligning the uncooked fringe of the binding with the uncooked fringe of the quilt.
Step 2: Mark the Fold Line
Fold the binding again over itself, making a crease parallel to the quilt edge. This crease will mark the fold line for the miter.
Step 3: Unfold the Binding Strip
Unfold the binding strip and fold it in half alongside the crease you simply made. The uncooked edge needs to be on the surface of the fold.
Step 4: Fold the Binding Over the Nook Once more
Carry the mitered binding over the nook of the quilt once more, aligning the uncooked fringe of the binding with the quilt edge.
Step 5: Fold the Different Facet of the Binding Over
Fold the opposite facet of the binding over the nook, aligning the uncooked edge with the primary facet. The miter will now be enclosed within the binding.
Step 6: Pin the Binding
Pin the binding in place on the nook and alongside the quilt edge.
Step 7: Sew the Binding
Sew the binding down, beginning and stopping on the nook. To safe the miter, make a number of small stitches forwards and backwards throughout the nook.
Step 8: Repeat for Different Corners
Repeat the method for the remaining corners of the quilt.
Step 9: Be a part of the Binding Ends
| Technique 1: Mitered Be a part of | Technique 2: Straight Be a part of |
|---|---|
| – Minimize each binding ends at 45-degree angles. – Overlap the ends and stitch collectively on the miter. – Press the seam open and trim the surplus. |
– Overlap the binding ends by 2-3 inches. – Fold underneath the uncooked edge of 1 finish and stitch it to the opposite finish. – Trim the surplus. |
Trim Extra Material for a Clear Look
As soon as the binding has been utilized, there can be extra material extending past the sides of the quilt. To realize a clear {and professional} end, this extra material must be trimmed fastidiously.
To trim the surplus material, comply with these steps:
1.
Fold the binding over the uncooked fringe of the quilt and press it in place.
2.
Utilizing sharp scissors, trim the surplus material to inside 1/4 inch of the folded edge.
3.
Unfold the binding and press it flat.
4.
Fold the binding over the trimmed edge and press it in place.
5.
Topstitch the binding down near the sting, securing it in place.
6.
Repeat these steps across the total perimeter of the quilt.
This is a desk summarizing the steps:
| Step | Motion |
|---|---|
| 1 | Fold binding over quilt edge and press. |
| 2 | Trim extra material 1/4″ from folded edge. |
| 3 | Unfold binding and press flat. |
| 4 | Fold binding over trimmed edge and press. |
| 5 | Topstitch binding down close to edge. |
| 6 | Repeat course of round total quilt. |
The way to Finish Binding on a Quilt
While you’re ending up a quilt, one of many final steps is to bind the sides. Binding not solely provides your quilt a completed look, however it additionally helps to guard the sides from fraying. As soon as you’ve got sewn the binding across the quilt, you may want to finish it off. This is how:
- Carry the 2 ends of the binding collectively, overlapping them by about 1 inch.
- Fold the overlapping edges underneath by about 1/2 inch.
- Pin the folded edges collectively.
- Sew the folded edges collectively utilizing a blind sew.
- Trim any extra binding.
You are completed!
Folks Additionally Ask
How do you make a quilt binding?
To make quilt binding, you may want to chop strips of material which might be 2 1/2 inches large. The size of the strips will range relying on the scale of your quilt. As soon as you’ve got minimize the strips, you may want to stitch them collectively to create a protracted strip of binding. Then, you may must fold the binding in half and press it. Lastly, you may want to stitch the binding to the sides of your quilt.
What’s the finest material for quilt binding?
The most effective material for quilt binding is a medium-weight cotton material. Cotton is a sturdy material that’s straightforward to work with. It additionally is available in all kinds of colours and patterns, so you will discover the right material to match your quilt.
How do you miter quilt binding?
Mitering quilt binding is a way that can be utilized to create a seamless end on the corners of your quilt. To miter quilt binding, you may want to chop the binding strips at a 45-degree angle. Then, you may want to stitch the binding strips collectively on the corners, utilizing a mitered seam. Lastly, you may must trim any extra binding.
