Hanging a microwave beneath the cupboard is an effective way to save lots of counter house and hold your kitchen wanting organized. However with so many several types of microwaves and cupboards, it may be troublesome to know the place to begin.
Listed here are a couple of suggestions that will help you get began: First, you should select the fitting microwave. Not all microwaves are designed to be hung beneath a cupboard. Be certain to examine the producer’s directions earlier than you buy a microwave.
After getting chosen a microwave, you should discover the fitting spot. The microwave needs to be hung at a top that’s snug so that you can attain and use. You also needs to ensure that the microwave will not be too near the cupboard above it. In any other case, the door could not open correctly.
After getting discovered the fitting spot, you should mount the microwave. There are a couple of alternative ways to mount a microwave beneath a cupboard. You should utilize a bracket, a countertop mount, or a wall mount. One of the best ways to mount a microwave will rely upon the kind of microwave you will have and the kind of cupboard you will have.
Making ready the Cupboard and Microwave
Making ready the Cupboard
1. Measure and mark the situation of the microwave on the underside of the cupboard. Make sure the chosen spot gives sufficient clearance for the microwave’s door and air flow.
2. Test for obstructions, equivalent to wires or pipes, that will hinder the set up.
3. Assemble the mounting bracket that may help the microwave. Comply with the producer’s directions to make sure correct meeting.
4. Place the mounting bracket within the marked location and safe it with screws or bolts.
5. Make sure the mounting bracket is stage and durable earlier than continuing to the subsequent step.
Making ready the Microwave
1. Unpack the microwave and take away all protecting supplies.
2. Measure the space between the mounting holes on the again of the microwave.
3. Find the mounting holes on the mounting bracket that correspond to the microwave’s measurements.
4. Elevate the microwave and align it with the mounting bracket.
5. Slowly slide the microwave onto the bracket, guaranteeing it suits securely.
6. Tighten the screws or bolts that maintain the microwave in place.
7. Join the microwave to an influence outlet and examine that it’s functioning accurately.
Putting in the Mounting Bracket
The mounting bracket is an integral part that gives stability and help on your microwave when put in beneath a cupboard. To make sure a safe set up, comply with these steps fastidiously:
1. Measure and Mark the Bracket Place
Use a measuring tape to find out the specified top and placement of the microwave beneath the cupboard. Mark the corresponding factors on the wall the place the bracket will probably be mounted.
2. Put together the Wall
Test the wall materials to make sure it might probably help the load of the microwave. If needed, use applicable anchors or wall plugs to strengthen the mounting floor.
3. Place and Safe the Bracket
Align the mounting bracket with the marked factors on the wall and safe it firmly utilizing the offered screws or bolts. Make sure the bracket is stage and securely mounted to the wall. It’s essential to make use of screws or bolts which can be the suitable size and diameter for the load of the microwave and the energy of the wall materials.
Screw and Bolt Specs
| Screw/Bolt Kind | Diameter | Size |
|---|---|---|
| Wooden Screws | #8 or #10 | 1 1/4″ – 2″ |
| Lag Bolts | 1/4″ | 2″ – 3″ |
| Plated Wall Anchors | N/A | 2″- 4″ |
As soon as the mounting bracket is securely in place, you possibly can proceed to the subsequent step of the set up course of, which includes attaching the microwave to the bracket.
Securing the Microwave
Selecting the Mounting {Hardware}
Choose mounting {hardware} that’s appropriate together with your microwave and cupboard. Widespread {hardware} choices embrace mounting brackets, screws, and anchors.
Gathering Instruments
Collect the mandatory instruments for the job, equivalent to a drill, screwdriver, stage, and measuring tape.
Marking the Mounting Holes
Measure the space between the mounting holes on the microwave’s again and mark the corresponding places on the underside of the cupboard.
Drilling Pilot Holes
Use a drill with a smaller bit than the screws to drill pilot holes on the marked places. This may assist information the screws and forestall splitting the wooden.
Putting in the Mounting Brackets
Align the mounting brackets with the pilot holes and safe them with screws. Make sure that the brackets are stage and tightly mounted.
Mounting the Microwave
Elevate the microwave onto the mounting brackets and align the mounting holes. Insert screws and tighten them till the microwave is securely hooked up.
Leveling the Microwave
Use a stage to examine the microwave’s alignment and regulate the mounting screws as wanted to make sure it’s stage.
Further Suggestions for Securing the Microwave:
* Use heavy-duty mounting {hardware} to help the load of the microwave.
* Test the microwave’s consumer handbook for particular mounting directions.
* Search skilled help if you’re not assured in performing the set up your self.
* Guarantee there may be adequate air flow across the microwave to stop overheating.
Connecting the Microwave
As soon as the mounting bracket is securely put in, it is time to join the microwave.
Electrical Connection
Join the microwave’s electrical twine to a grounded, three-prong outlet. The outlet needs to be devoted for the microwave and never shared with different home equipment.
Vent Connection (for Over-the-Vary Microwaves)
In case your microwave has a built-in vent fan, it can should be related to an exterior exhaust duct. Consult with your microwave’s consumer handbook for particular directions on how you can join the vent.
Gasoline Connection (for Gasoline Microwaves)
Gasoline microwaves require a gasoline line connection. This needs to be put in by a certified gasoline technician.
Desk: Connecting the Microwave
| Connection Kind | Required Parts |
|---|---|
| Electrical | Microwave electrical twine, grounded three-prong outlet |
| Vent (Over-the-Vary) | Microwave vent adapter, exhaust duct |
| Gasoline | Microwave gasoline hose, gasoline line connection |
As soon as all connections are safe, you possibly can activate the microwave and check it to make sure it’s working correctly.
Testing the Set up
1. Plug the microwave into an accessible outlet. Confirm that the microwave is purposeful by choosing the “30 seconds” characteristic (or comparable) and putting a 1-cup of water inside. Press “Begin” and observe the microwave for 30 seconds.
2. As soon as the water boils, enable the microwave to chill for a couple of minutes. Open the microwave door and take away the water cup fastidiously.
3. Visually examine the set up for any seen indicators of injury or defects. Search for any unfastened screws, cracks, deformations, or another abnormalities.
4. Take a look at the microwave door by opening and shutting it a number of occasions. Make sure that the door operates easily and closes securely with none gaps or obstacles.
5. Take a look at the microwave turntable by putting a light-weight object within the middle of the plate. Shut the door and activate the microwave for a couple of seconds. Observe if the turntable rotates easily and evenly.
6. Test the microwave’s lighting by urgent the “Mild” button (if the microwave has this characteristic). Confirm that the sunshine activates and off with none flickering or dimming.
7. Use the microwave for a couple of minutes to carry out extra exams. Warmth a easy dish or a cup of water to evaluate the microwave’s efficiency, performance, and even heating distribution. Observe the microwave’s operation, hear for any uncommon noises, and examine the heated meals for any unevenness or inconsistencies.
Putting in the Microwave Bracket
Securely connect the microwave bracket to the underside of the cupboard, guaranteeing it’s stage and aligned with the microwave’s mounting holes.
Hanging the Microwave
Fastidiously elevate the microwave and slide it onto the bracket, aligning the mounting holes. Safe the microwave to the bracket utilizing the offered bolts or screws.
Tightening the Screws
Use a screwdriver to tighten the screws that maintain the microwave to the bracket, guaranteeing they’re firmly secured.
Connecting the Energy Wire
Insert the facility twine into the outlet and guarantee it’s securely plugged in.
Testing the Microwave
Activate the microwave and run it at low energy for a couple of minutes to confirm whether it is functioning correctly.
Troubleshooting Widespread Points
Microwave Would not Flip On
Test if the facility twine is plugged in and the outlet is working. Whether it is, reset the microwave by unplugging it and plugging it again in.
Microwave Turns On However Would not Warmth Meals
Be certain the microwave door is closed correctly and the door switches are functioning. Make sure that the turntable is rotating freely and that there isn’t a obstruction contained in the microwave.
Microwave Sparks or Smokes
Instantly flip off the microwave and unplug it. Clear the microwave totally, take away any metallic utensils, and guarantee there aren’t any meals spills or grease buildup inside. If the issue persists, contact a certified technician.
| Microwave Measurement | Really helpful Cupboard Peak |
|---|---|
| 1.5 cubic toes or much less | 18 inches |
| 1.6 to 2.0 cubic toes | 21 inches |
| 2.1 to 2.5 cubic toes | 24 inches |
Skilled Set up Choices
1. Rent a Licensed Electrician
That is probably the most advisable possibility if you’re not assured in your DIY abilities or if the set up requires advanced electrical work. A licensed electrician will make sure that the microwave is put in safely and meets all electrical codes.
2. Contact the Microwave Producer
Some microwave producers supply skilled set up providers for an extra charge. This generally is a handy possibility if you wish to make sure that the set up is completed accurately by licensed technicians.
3. Use a Dwelling Enchancment Service
Many dwelling enchancment shops and providers supply microwave set up as a part of their providers. These providers usually embrace supply, set up, and any needed electrical work.
4. Rent a Handyman
In case you are searching for a inexpensive possibility, you possibly can rent a handyman to put in your microwave. Nonetheless, ensure that the handyman has expertise in putting in microwaves and might present references.
5. Hire a Device
In case you are snug with DIY initiatives, you possibly can lease a microwave mounting bracket device from a ironmongery shop. These instruments make it simpler to align and safe the microwave beneath the cupboard.
6. Use a Mounting Plate
A mounting plate is a metallic bracket that attaches to the underside of the microwave and gives a safe floor for mounting. It is a good possibility if the underside of your cupboard will not be flat or if you wish to keep away from drilling holes into the cupboard.
7. Use a Microwave Hood Mixture
A microwave hood mixture is a single unit that mixes a microwave and a variety hood. It is a space-saving possibility that’s splendid for kitchens with restricted house.
8. Construct a Customized Shelf
When you’ve got a big microwave or need to create a extra customized look, you possibly can construct a customized shelf to help the microwave. This selection requires extra DIY abilities however can present a extra personalised answer.
9. Use a Cupboard-Mounted Microwave
Cupboard-mounted microwaves are designed to be put in inside a cupboard, offering a seamless look and saving countertop house. It is a good possibility in case you have a big kitchen.
10. Think about the Following Components When Selecting a Skilled Microwave Set up Choice
| Issue | Rationalization |
|---|---|
| Price | Skilled set up prices can range relying on the choice you select and the complexity of the job. |
| Comfort | Some choices, equivalent to hiring a licensed electrician or utilizing a house enchancment service, supply extra comfort. |
| Expertise | Make sure that the installer you select has expertise in putting in microwaves. |
| Security | Electrical work needs to be achieved by a certified electrician to make sure security. |
| Guarantee | Some set up providers could supply a guaranty on their work. |
How To Hold Microwave Beneath Cupboard
Hanging a microwave beneath a cupboard could be an effective way to save lots of counter house and make your kitchen look extra organized. It is also a comparatively straightforward undertaking that may be accomplished in a couple of hours.
Listed here are the steps on how you can cling a microwave beneath a cupboard:
1. Collect your supplies. You will want a microwave, a drill, a screwdriver, a stage, a pencil, and a stud finder.
2. Discover a appropriate location. The microwave needs to be mounted beneath a cupboard that’s no less than 30 inches above the ground. The cupboard also needs to be broad sufficient to accommodate the microwave.
3. Mark the situation of the mounting holes. Use a stage to ensure that the microwave is stage. Then, use a pencil to mark the situation of the mounting holes.
4. Drill the mounting holes. Use a drill to drill the mounting holes. The holes needs to be deep sufficient to accommodate the screws.
5. Insert the screws. Insert the screws into the mounting holes. Tighten the screws till the microwave is securely mounted.
6. Plug within the microwave. Plug the microwave into an outlet. Activate the microwave to ensure that it’s working correctly.
