Putting in a brand new bathe valve generally is a daunting activity, but it surely’s really fairly easy when you have the fitting instruments and know-how. On this article, we’ll stroll you thru the steps on set up a Moen bathe valve, one of the vital widespread manufacturers in the marketplace. By following our directions, you will have your new bathe valve up and working very quickly.
Earlier than you start, collect the entire needed instruments and supplies. You will want a Phillips head screwdriver, a flat head screwdriver, a pair of pliers, a degree, and a pipe wrench. You will additionally want your new Moen bathe valve, in addition to any needed trim. After you have all the pieces you want, you may start the set up course of. First, flip off the water provide to your bathe. Subsequent, take away the previous bathe valve by unscrewing the screws that maintain it in place. As soon as the previous valve is eliminated, you may set up the brand new Moen valve. To do that, merely screw the brand new valve into place and tighten it with the pliers.
As soon as the brand new valve is put in, you may connect the trim. To do that, merely snap the trim items into place. As soon as the trim is put in, you may flip the water provide again on and take a look at the brand new valve. If the valve is working correctly, you are all completed! Putting in a brand new Moen bathe valve is a comparatively easy activity that may be accomplished in only a few hours. By following our directions, it can save you your self the time and expense of hiring a plumber.
Important Instruments and Supplies
Earlier than embarking on the set up course of, it’s essential to make sure you have the mandatory instruments and supplies at hand. This complete checklist will information you in gathering all the pieces you want:
### Important Instruments
- Adjustable wrench: A software that lets you alter its grip for tightening and loosening bolts and nuts of varied sizes.
- Basin wrench: Particularly designed for tightening and loosening nuts in hard-to-reach areas, corresponding to beneath sinks and behind taps.
- Channel-lock pliers: Versatile pliers that may grip and rotate objects with a clean, adjustable jaw.
- Hex key: A software formed like an “L” or “T” with hexagonal ends, used for tightening and loosening fasteners with hexagonal heads.
- Degree: An instrument used to find out whether or not a floor is horizontal or vertical.
- Phillips head screwdriver: A screwdriver with a cross-shaped tip, generally used to tighten and loosen screws with cross-shaped heads.
- Plumber’s putty: A moldable, putty-like materials used to seal gaps and stop leaks round pipes and fixtures.
- Tape measure: A versatile software used for measuring size and distance.
- Utility knife: A handheld chopping software with a pointy, retractable blade, used for chopping and scoring supplies.
### Important Supplies
| Element | Amount |
|---|---|
| Moen bathe valve | 1 |
| Bathe cartridge | 1 |
| Bathe arm | 1 |
| Bathe head | 1 |
| Trim equipment (deal with, escutcheon, and so forth.) | 1 |
| PEX tubing (if relevant) | As wanted |
| CPVC pipes (if relevant) | As wanted |
Eradicating the Outdated Valve
Put together for Elimination
Earlier than you start, collect your instruments: an adjustable wrench, pliers, a small flathead screwdriver, and a flashlight (if needed). Flip off the water provide on the major shut-off valve or the valves behind the entry panel. Open the showerhead and tap to launch any remaining water strain.
Disassemble the Valve Trim
Begin by eradicating the deal with by pulling it straight off. Subsequent, gently pry off the escutcheon plate utilizing a small flathead screwdriver or a plastic pry software. This may expose the valve cartridge or stem.
Extract the Cartridge or Stem
In case your valve has a cartridge, grasp it with pliers or a wrench and gently pull it straight out of the valve physique. In case your valve has a stem, take away the packing nut utilizing an adjustable wrench. Chances are you’ll want to make use of a flashlight to see contained in the valve physique and information the stem out. Watch out to not injury the valve physique.
Making ready the Wall for Set up
1. Take away the Outdated Valve and Trim
* Shut off the water provide to the bathe.
* Take away the deal with, trim plate, and every other seen elements of the previous valve.
* Use a wrench to disconnect the provision strains from the valve.
2. Test the Wall Cavity
* Test the cavity behind the wall the place the brand new valve can be put in.
* Guarantee it’s clear and freed from any particles or obstructions.
* If there’s a backer board or cement board, be sure that it’s securely mounted to the wall.
3. Create a Tough Opening
* Decide the situation of the brand new valve and mark the define on the wall.
* Use a drywall noticed or a utility knife to chop a gap within the drywall.
* The opening ought to be barely bigger than the rough-in valve dimensions supplied by the producer.
Desk: Moen Valve Tough-In Dimensions
| Valve Measurement | Tough-In Opening Width | Tough-In Opening Peak |
|---|---|---|
| Commonplace (1/2 inch) | 5-13/16 inches | 6-5/16 inches |
| Giant (3/4 inch) | 6-13/16 inches | 7-5/16 inches |
* If the wall studs intervene with the tough opening, notch them out barely to create clearance for the valve.
Putting in the Tough-in Valve
The rough-in valve is step one in putting in a Moen bathe valve. It’s chargeable for controlling the circulate of water to the showerhead and tap. Putting in the rough-in valve is a comparatively easy course of that may be accomplished in a couple of hours.
Listed here are the steps for putting in a Moen bathe rough-in valve:
- Flip off the water provide to the bathe.
- Take away the previous bathe valve. If there isn’t a present valve, you’ll need to chop a gap within the wall for the brand new valve.
- Set up the rough-in valve within the wall. The valve ought to be put in in order that the deal with is going through up.
- Join the water provide strains to the rough-in valve. Make it possible for the cold and warm water strains are linked to the right ports on the valve.
- Activate the water provide and verify for leaks.
Ideas for Putting in a Moen Bathe Tough-in Valve
Listed here are a couple of ideas for putting in a Moen bathe rough-in valve:
- Use a degree to be sure that the rough-in valve is put in degree.
- Tighten the water provide strains securely, however don’t overtighten them.
- Check the valve earlier than putting in the trim. This may be sure that the valve is working correctly.
| Instrument | Description |
|---|---|
| Adjustable wrench | Used to tighten the water provide strains. |
| Degree | Used to be sure that the rough-in valve is put in degree. |
| Plumber’s putty | Used to seal the rough-in valve to the wall. |
| Screwdriver | Used to take away the previous bathe valve and set up the brand new one. |
| Tape measure | Used to measure the space between the water provide strains. |
Putting in a Moen bathe rough-in valve is a comparatively easy course of that may be accomplished in a couple of hours. By following these steps, you may be sure that the valve is put in accurately and is working correctly.
Setting the Cartridge
After assembling the valve, now you can set up the cartridge. Here is a step-by-step information:
1. Take away the Deal with and Escutcheon
Begin by eradicating the deal with by pulling it right away from the valve. Then, use a flat-head screwdriver to pry off the escutcheon plate that covers the cartridge.
2. Take away the Cease Ring
As soon as the escutcheon is eliminated, you will see a cease ring across the cartridge. Use a pair of pliers to grip the cease ring and switch it counterclockwise to loosen it.
3. Pull Out the Cartridge
As soon as the cease ring is free, you may pull the cartridge straight out of the valve physique.
4. Examine the Cartridge and O-Rings
Earlier than putting in the brand new cartridge, examine it rigorously for any injury. Additionally, verify the O-rings on the cartridge for any put on or deterioration. If needed, change the O-rings with new ones.
5. Insert the New Cartridge
Align the brand new cartridge with the valve physique and push it into place. Be sure it seats accurately and is absolutely inserted.
| Troubleshooting Ideas |
|---|
| If the cartridge is just not absolutely inserted, it could not operate correctly. |
| If the cartridge is broken, it could not seal correctly and trigger leaks. |
| If the O-rings are worn or broken, they might not present a correct seal and trigger leaks. |
6. Set up the Cease Ring
Place the cease ring over the cartridge and switch it clockwise to tighten it. Be sure it is comfortable however not overtightened.
7. Reinstall the Escutcheon and Deal with
Place the escutcheon plate over the valve and press it into place. Lastly, reattach the deal with and safe it with the set screw.
Putting in the Trim Plate
As soon as the valve physique is put in, it is time to set up the trim plate. The trim plate is the ornamental a part of the bathe valve that you simply see and work together with. It usually has handles for controlling the water circulate and temperature, and it may possibly are available a wide range of types and finishes to match your rest room décor.
Step 7: Putting in the Deal with
The deal with is probably the most seen a part of the trim plate, so it is vital to put in it accurately. Listed here are the steps to comply with:
- Apply a small quantity of silicone sealant to the bottom of the deal with.
- Align the deal with with the valve physique and press it into place.
- Utilizing a screwdriver, tighten the set screw on the again of the deal with.
- Repeat steps 2-3 for the opposite deal with.
- Use a moist fabric to wipe away any extra silicone sealant.
- Activate the water and verify for any leaks.
- If there are any leaks, tighten the set screws on the handles till the leaks cease.
Tip: In case you are putting in a Moen Posi-Temp valve, the handles can have a pink and blue indicator. The pink indicator is for decent water, and the blue indicator is for chilly water.
Testing the Valve for Leaks
As soon as the valve is put in, it is important to check it for leaks. Here is how:
- Activate the water provide to the bathe.
- Open the cold and warm taps on the showerhead.
- Test for leaks in any respect the connections, together with the bathe arm, valve physique, and cartridge.
- In the event you discover any leaks, tighten the connections as needed or seek the advice of an expert plumber.
Checking for Leaks within the Valve Physique
In the event you suspect a leak within the valve physique, there are a couple of further steps you may take:
| Location of Leak | Potential Trigger | Answer |
|---|---|---|
| Valve stem packing nut | Unfastened nut or worn packing | Tighten the packing nut or change the packing |
| Valve seat | Broken or worn seat | Change the valve seat |
| Valve physique itself | Cracked or broken physique | Change the valve physique |
Notice: All the time shut off the water provide earlier than trying any repairs.
Ending Touches
With the rough-in full, it is time to add the ending touches to your Moen bathe valve.
1. **Snap on the Deal with:** Place the deal with over the valve physique and align the screw holes.
2. **Screw within the Deal with Screw:** Tighten the screw utilizing a screwdriver till the deal with is safe.
3. **Safe the Trim Plate:** Place the trim plate over the escutcheon and push it into place till it snaps.
4. **Wipe the Deal with with a Gentle Material:** Take away any filth or fingerprints from the deal with.
5. **Get pleasure from Your New Bathe Valve:** Activate the water provide and take a look at your new Moen bathe valve.
Valve Trim Equipment Choice
Moen presents a variety of valve trim kits to enrich your bathe design. Here is a desk summarizing the out there choices:
| Trim Equipment | Model | End |
|---|---|---|
| M-Pact System | Customizable | Number of Finishes |
| Posi-Temp Valve Trim | Conventional | Chrome, Brushed Nickel, Oil-Rubbed Bronze |
| Moenflo XL Valve Trim | Trendy | Chrome, Brushed Gold, Matte Black |
How To Set up Moen Bathe Valve
Putting in a Moen bathe valve is a comparatively easy activity that may be accomplished in a couple of hours. By following these step-by-step directions, you may guarantee a profitable set up.
Step 1: Collect your instruments and supplies. You will have the next:
- Phillips head screwdriver
- Adjustable wrench
- Plumber’s putty
- Teflon tape
- New Moen bathe valve
Step 2: Flip off the water provide to the bathe. That is often executed by closing the principle shut-off valve for the home. In the event you have no idea the place the principle shut-off valve is situated, seek the advice of a certified plumber.
Step 3: Take away the previous bathe valve. As soon as the water provide is turned off, you may take away the previous bathe valve. To do that, first take away the deal with by unscrewing the set screw. Then, use an adjustable wrench to loosen the packing nut. As soon as the packing nut is free, you may pull the valve out of the wall.
Step 4: Set up the brand new Moen bathe valve. Apply a bead of plumber’s putty across the base of the brand new valve. Then, insert the valve into the wall and tighten the packing nut. Lastly, connect the deal with to the valve and tighten the set screw.
Step 5: Activate the water provide and verify for leaks. As soon as the brand new valve is put in, activate the water provide and verify for leaks. If there are any leaks, tighten the packing nut till the leak stops.
Individuals Additionally Ask About How To Set up Moen Bathe Valve
What’s the easiest way to take away a Moen bathe valve?
One of the simplest ways to take away a Moen bathe valve is to make use of an adjustable wrench to loosen the packing nut. As soon as the packing nut is free, you may pull the valve out of the wall.
How do I do know if my Moen bathe valve must be changed?
There are a couple of indicators that your Moen bathe valve might must be changed, together with:
- Leaks
- Issue turning the deal with
- Uncommon noises
Can I set up a Moen bathe valve myself?
Sure, you may set up a Moen bathe valve your self. Nonetheless, it is very important comply with the directions rigorously and to make sure you flip off the water provide earlier than beginning the set up.
