When you’ve misplaced your keys or had them stolen, you could be questioning the best way to rekey a Kwikset lock with out a key. Happily, it is a comparatively easy course of that may be performed with just a few fundamental instruments. On this article, we’ll stroll you thru the steps on the best way to rekey a Kwikset lock with out a key.
Earlier than you start, you may want to assemble just a few instruments. You may want a small screwdriver, a pair of pliers, and a brand new Kwikset key. You should purchase a brand new key from a ironmongery store or on-line. After you have your instruments, you may start the method of rekeying your lock.
Gathering Important Instruments
Rekeying a Kwikset lock with out a key requires just a few important instruments. Earlier than embarking on this job, guarantee you could have the next gadgets at your disposal:
Lock Rekey Equipment
A Kwikset lock rekey package is specifically designed for rekeying Kwikset locks. It usually features a collection of alternative pins, springs, and a rekeying instrument. These kits can be found at most {hardware} shops and on-line retailers.
Screwdriver
You may want a small, flathead screwdriver to take away the lock cylinder from the door. Select a screwdriver that matches snugly into the screw heads to attenuate the danger of stripping.
Punch Software
A punch instrument is used to drive the pins out of the lock cylinder. It must be sufficiently small to suit contained in the cylinder and lengthy sufficient to succeed in the pins.
Key Clean
A key clean is important for creating a brand new key that may function the rekeyed lock. Select a key clean that’s suitable together with your Kwikset lock.
Along with these important instruments, you might also discover the next gadgets useful:
| Merchandise | Function |
|---|---|
| Lubricating oil | Lubricating the brand new pins and is derived |
| Small brush or compressed air | Cleansing the lock cylinder |
Eradicating the Knob
Earlier than you may rekey a Kwikset lock with out a key, it is advisable to take away the knob. This can be a comparatively easy course of that may be accomplished in a couple of minutes.
To take away the knob, you will have a screwdriver. First, insert the screwdriver into the small gap on the facet of the knob. Then, flip the screwdriver counterclockwise till the knob loosens. As soon as the knob is free, you may pull it off the door.
After you have eliminated the knob, you will have to take away the lock cylinder. To do that, insert the screwdriver into the small gap on the again of the lock cylinder. Then, flip the screwdriver counterclockwise till the lock cylinder loosens. As soon as the lock cylinder is free, you may pull it out of the door.
Now that you’ve got eliminated the lock cylinder, you may rekey it. To do that, you will have a rekeying package. A rekeying package usually features a new key, a set of pins, and a wrench.
To rekey the lock cylinder, comply with these steps:
- Insert the brand new key into the lock cylinder.
- Flip the important thing to the locked place.
- Insert the wrench into the small gap on the again of the lock cylinder.
- Flip the wrench counterclockwise till the lock cylinder loosens.
- Pull the lock cylinder out of the door.
- Take away the previous pins from the lock cylinder.
- Insert the brand new pins into the lock cylinder.
- Reinsert the lock cylinder into the door.
- Flip the wrench clockwise to tighten the lock cylinder.
- Insert the brand new key into the lock cylinder.
- Flip the important thing to the unlocked place.
Suggestions
- In case you are having hassle eradicating the knob or the lock cylinder, you may attempt utilizing a lubricant.
- In case you are not snug rekeying the lock cylinder your self, you may take it to a locksmith.
- Rekeying a lock cylinder is a comparatively easy course of, however you will need to comply with the directions fastidiously.
Instruments Wanted
| Software | Use |
|---|---|
| Screwdriver | Take away the knob and lock cylinder |
| Rekeying package | Rekey the lock cylinder |
| Lubricant | Assist take away the knob or lock cylinder (non-compulsory) |
Disassembling the Knob Deal with
Step 3: Eradicating the Inside Deal with
Start by finding the small hex screw located on the facet of the inside deal with. Utilizing the suitable hex key or Allen wrench, fastidiously loosen the screw.
As soon as the screw is eliminated, grip the deal with firmly and pull it straight in the direction of you. It ought to slide off the spindle with ease. Nonetheless, if it resists, gently wiggle it forwards and backwards whereas pulling to launch it.
Upon eradicating the inside deal with, you’ll discover the keyhole cylinder uncovered. Be aware of the steel C-clip securing the cylinder to the lock physique. This clip will must be eliminated within the subsequent step.
To help you with the next steps, we’ve summarized the disassembly course of in a desk under:
| Step | Motion |
|---|---|
| 1 | Find the hex screw on the facet of the inside deal with. |
| 2 | Loosen the hex screw utilizing the suitable hex key or Allen wrench. |
| 3 | Grip the inside deal with and pull it straight in the direction of you to slip it off the spindle. |
| 4 | Observe the keyhole cylinder uncovered after eradicating the deal with. |
| 5 | Establish the steel C-clip securing the cylinder to the lock physique. |
Figuring out the Shear Line
Step 4: Find the Shear Line
a) Study the keyway of the lock. You’ll discover a skinny, raised line operating horizontally throughout the center of the keyway. That is the shear line.
b) Insert a small, flat-head screwdriver or choose into the keyway and align it with the shear line. Gently push down on the screwdriver or choose till you’re feeling resistance.
c) After you have positioned the shear line, mark its place on the keyway with a pencil or marker. This may function a reference level for rekeying the lock.
| Instruments required |
|---|
| Small, flat-head screwdriver or choose |
| Pencil or marker |
Rekeying the Lock Cylinder
Rekeying the lock cylinder is a extra advanced course of however it may be performed with out a key. You will have to buy a brand new lock cylinder to your Kwikset lock and a rekeying package. The rekeying package will include directions on the best way to disassemble the lock cylinder and reassemble it with the brand new key.
Listed here are the steps on the best way to rekey a Kwikset lock cylinder with out a key:
- Take away the lock cylinder. To do that, first take away the screws which are holding the lock cylinder in place. Then, use a screwdriver or a pair of pliers to drag the lock cylinder out of the lock.
- Disassemble the lock cylinder. As soon as the lock cylinder is eliminated, you will have to disassemble it. To do that, first take away the C-clip that’s holding the cylinder collectively. Then, pull the plug and key pins out of the cylinder.
- Reassemble the lock cylinder with the brand new key. To do that, first insert the brand new key into the cylinder. Then, insert the plug and key pins into the cylinder within the right order. Lastly, substitute the C-clip.
- Reinstall the lock cylinder. As soon as the lock cylinder is reassembled, you may reinstall it within the lock. To do that, first insert the lock cylinder into the lock. Then, substitute the screws which are holding the lock cylinder in place.
- Check the brand new key. As soon as the lock cylinder is reinstalled, you may take a look at the brand new key. To do that, insert the brand new key into the lock and switch it. The lock ought to now open and shut easily.
Suggestions for Rekeying a Kwikset Lock Cylinder With no Key
Listed here are some suggestions for rekeying a Kwikset lock cylinder with out a key:
| Tip | Description |
|---|---|
| Use a rekeying package. | A rekeying package will include the entire instruments and directions that it is advisable to rekey a Kwikset lock cylinder. |
| Watch out when disassembling and reassembling the lock cylinder. | The lock cylinder is a fragile piece of equipment. In case you are not cautious, you might harm it. |
| Check the brand new key earlier than you reinstall the lock cylinder. | This may be certain that the brand new key works correctly. |
Reassembling the Knob Deal with
To reassemble the knob deal with, comply with these steps:
1.
Rotate the knob deal with clockwise to the vertical place.
2.
Insert the bottom of the lock cylinder into the outlet within the knob deal with.
3.
Align the holes within the knob deal with and lock cylinder.
4.
Safe the lock cylinder by urgent on the bottom.
5.
Insert the screw into the knob deal with and tighten it till the knob deal with is safe.
6.
Utilizing a pair of needle-nose pliers, gently insert one tip into the opening on the backside of the knob deal with. Grip the C-clip with the pliers and pull it outward. The C-clip will snap off, releasing the knob deal with from the lock meeting.
| Aspect | Steps |
|---|---|
| Left | Pull the clip in the direction of the left facet of the doorknob to take away it |
| Proper | Pull the clip in the direction of the appropriate facet to take away it |
With the C-clip eliminated, you may simply pull the knob deal with off the lock meeting.
Reinstalling the Knob
As soon as the lock cylinder has been changed, it is time to reinstall the knob. This is the best way to do it:
- Slide the knob onto the spindle.
- Align the set screw holes on the knob with the holes on the spindle.
- Insert the set screws into the holes and tighten them utilizing an Allen key.
- Slide the escutcheon (the ornamental plate across the knob) over the knob.
- Align the screw holes on the escutcheon with the screw holes on the door.
- Insert the screws into the holes and tighten them utilizing a screwdriver.
- Check the knob to ensure it is working correctly. It ought to flip easily and open the door simply.
Further Suggestions for Reinstalling the Knob:
– If the knob does not flip easily, it could be essential to lubricate it. Use a graphite-based lubricant or a twig lubricant particularly designed for door locks.
– If the knob is free, it could be essential to tighten the set screws. Use a magnet to retrieve the set screws in the event that they fall into the door.
– If the escutcheon is free, it could be essential to tighten the screws.
– If the knob nonetheless does not work correctly, it could be crucial to exchange it.
Testing the Rekeyed Lock
After rekeying the lock, it is essential to check it completely to make sure it capabilities appropriately. This is the best way to do it:
- Insert the newly lower key into the rekeyed lock and switch it to the locked place. The important thing ought to match easily and switch effortlessly.
- Try and unlock the lock with previous keys or keys from different locks. If the lock stays safe and solely opens with the brand new key, the rekeying course of was profitable.
- Insert the important thing at barely totally different angles to simulate real-world utilization. The lock ought to function easily whatever the angle the secret is inserted.
- Pay attention for any binding or grinding sounds when turning the important thing. If the important thing feels sticky or makes noises, it could point out that the rekeying was not performed appropriately.
- Repeatedly lock and unlock the door a number of occasions to make sure that the brand new key constantly operates the lock easily.
- Apply a small quantity of graphite powder or lock lubricant to the keyhole to make sure easy operation and stop put on.
- If the lock doesn’t operate correctly after rekeying, do not hesitate to contact knowledgeable locksmith for additional help.
Insert the New Key
Strive Totally different Keys
Check with Totally different Angles
Examine for Binding
Cycle the Lock
Lubricate the Lock
Name for Help
By following these steps, you may completely take a look at the rekeyed lock and be certain that it operates as anticipated, offering you with peace of thoughts and enhanced safety.
Troubleshooting Frequent Points
1. The lock nonetheless does not work after rekeying.
Examine that the secret is totally inserted into the lock and turned all the best way. If the secret is not inserted all the best way, it could not be capable of interact the pins within the lock cylinder. Additionally, ensure that the secret is lower appropriately. If the secret is not lower appropriately, it could not be capable of flip the lock cylinder.
2. The secret is caught within the lock.
If the secret is caught within the lock, don’t drive it. Chances are you’ll harm the important thing or the lock. As a substitute, attempt to wiggle the important thing gently whereas pulling it out. If the important thing nonetheless doesn’t come out, you could must name a locksmith.
3. The lock is jammed.
If the lock is jammed, don’t drive it. Chances are you’ll harm the lock. As a substitute, attempt to lubricate the lock with a graphite-based lubricant. If the lock nonetheless doesn’t work, you could must name a locksmith.
4. The lock is making a wierd noise.
If the lock is making a wierd noise, it could be an indication that the lock is broken. You need to have the lock inspected by a locksmith as quickly as attainable.
5. The lock is just not working correctly.
If the lock is just not working correctly, it could be an indication that the lock is worn out. You need to have the lock changed by a locksmith.
6. The lock is just not safe.
If the lock is just not safe, it could be an indication that the lock is just not put in appropriately. You need to have the lock inspected by a locksmith as quickly as attainable.
7. The lock is just not weatherproof.
If the lock is just not weatherproof, it could be an indication that the lock is just not put in appropriately. You need to have the lock inspected by a locksmith as quickly as attainable.
8. The lock is just not fireproof.
If the lock is just not fireproof, it could be an indication that the lock is just not put in appropriately. You need to have the lock inspected by a locksmith as quickly as attainable.
9. Different issues
When you encounter another issues together with your Kwikset lock, you may seek the advice of the Kwikset web site or name Kwikset customer support.
| Downside | Answer |
|—|—|
| The lock is caught | Lubricate the lock with a graphite-based lubricant. |
| The secret is caught within the lock | Don’t drive it. Attempt to wiggle the important thing gently whereas pulling it out. |
| The lock is jammed | Don’t drive it. Attempt to lubricate the lock with a graphite-based lubricant. |
| The lock is making a wierd noise | Have the lock inspected by a locksmith. |
| The lock is just not working correctly | Have the lock changed by a locksmith. |
| The lock is just not safe | Have the lock inspected by a locksmith. |
| The lock is just not weatherproof | Have the lock inspected by a locksmith. |
| The lock is just not fireproof | Have the lock inspected by a locksmith. |
Security Concerns
Earlier than you start rekeying your Kwikset lock, it is essential to take the next security precautions:
1. Guarantee Your Security
Put on gloves to guard your fingers from sharp edges. Use a flashlight to light up the lock if it is in a dimly lit space. When you’re not snug rekeying the lock your self, contact a professional locksmith.
2. Take away Energy from Linked Gadgets
If the lock is linked to an electrical strike or different digital system, guarantee the facility is turned off to forestall electrical shock.
3. Clear the Space
Take away any obstacles or muddle from the world across the lock to supply a transparent and protected workspace.
4. Preserve Kids and Pets Away
Kids and pets can simply get injured by lock parts, so hold them out of attain whereas rekeying the lock.
5. Use Correct Instruments
Solely use the instruments designed for rekeying Kwikset locks. Keep away from utilizing screwdrivers or different improvised instruments that would harm the lock.
6. Observe Directions Fastidiously
Learn the directions for rekeying the lock completely earlier than beginning. When you’re not sure about any step, cease and search skilled assist.
7. Keep away from Over-Tightening Screws
Tighten the screws simply sufficient to safe the parts with out stripping them or damaging the lock.
8. Check the Lock Earlier than Closing
After rekeying, take a look at the lock with a brand new key to make sure it operates easily. If there are any points, repeat the rekeying course of.
9. Lubricate the Lock
Apply a small quantity of lock lubricant to the keyway and shifting components to forestall rust and guarantee easy operation.
10. Retailer Pinning Equipment Securely
When you’re utilizing a pinning package, hold it away from youngsters and pets. Guarantee they’re saved in a protected location after finishing the rekeying course of.
How To Rekey A Kwikset Lock With out A Key
Rekeying a Kwikset lock with out a key could be a daunting job, however it’s attainable with the appropriate instruments and somewhat little bit of persistence. Here’s a step-by-step information on the best way to do it:
- Collect your instruments. You will have a small screwdriver, a pair of needle-nose pliers, and a brand new Kwikset key.
- Take away the screws. There are two screws positioned on the within of the door deal with. Take away these screws with the screwdriver.
- Take away the deal with. As soon as the screws are eliminated, you may pull the deal with straight off of the door.
- Take away the faceplate. There’s a small faceplate positioned on the within of the door. Take away this faceplate with the screwdriver.
- Take away the cylinder. The cylinder is the a part of the lock that incorporates the pins. Use the needle-nose pliers to grip the cylinder and pull it straight out of the door.
- Take away the previous pins. The previous pins are positioned contained in the cylinder. Use the screwdriver to push them out of the cylinder.
- Insert the brand new pins. The brand new pins are included with the brand new Kwikset key. Insert the brand new pins into the cylinder in the identical order because the previous pins.
- Reassemble the lock. Reassemble the lock in reverse order. Begin by inserting the cylinder into the door. Then, substitute the faceplate. Subsequent, substitute the deal with. Lastly, substitute the screws.
- Check the lock. As soon as the lock is reassembled, take a look at it with the brand new key. The lock ought to now work correctly.
Individuals Additionally Ask About How To Rekey A Kwikset Lock With out A Key
Does rekeying a lock weaken it?
Rekeying a lock doesn’t weaken it. The truth is, it might truly make it stronger. While you rekey a lock, you’re changing the previous pins with new pins. This makes it tougher for somebody to choose the lock.
Is it tough to rekey a Kwikset lock?
Rekeying a Kwikset lock is just not tough, nevertheless it does require some persistence and a focus to element. When you comply with the steps outlined on this information, you must be capable of rekey your lock with none issues.
How a lot does it value to rekey a Kwikset lock?
The price to rekey a Kwikset lock will differ relying on the locksmith you select. Nonetheless, most locksmiths will cost between $20 and $50 to rekey a lock.
