In case your LG Mannequin WT1101CW washer is not draining correctly, you might must take away and clear the drain pump. It’s situated on the backside of the washer, and it’s chargeable for pumping the water out of the bathtub. Here’s a step-by-step information on easy methods to take away the drain pump in your LG Mannequin WT1101CW washer. Nonetheless, should you’re not comfy doing this your self, name a certified equipment restore technician.
Earlier than you start, you have to to assemble a couple of instruments: a Phillips head screwdriver, a flat head screwdriver, and a pair of pliers. Additionally, you will want a bucket to catch the water that may drain from the pump once you take away it. First, unplug the washer from the facility outlet. Subsequent, flip off the water provide to the washer. Then, place the bucket underneath the drain pump to catch the water that may drain out. Lastly, use the Phillips head screwdriver to take away the screws that maintain the drain pump in place.
Upon getting eliminated the screws, use the flat head screwdriver to pry the drain pump free from the washer. Watch out to not harm the drain pump or the encompassing parts. As soon as the drain pump is free, use the pliers to disconnect the hoses which might be related to it. Lastly, elevate the drain pump out of the washer. Now that you’ve got eliminated the drain pump, you may clear it. To do that, use a humid material to wipe away any grime or particles that has collected on the pump. You may as well use a small brush to scrub the within of the pump. As soon as the pump is clear, reassemble it within the reverse order that you simply eliminated it.
Finding the Drain Pump
The drain pump is a crucial part of your LG Mannequin WT1101CW washer, chargeable for expelling water from the bathtub through the spin cycle. In case your washer is just not draining correctly, a defective drain pump might be the offender.
Finding the drain pump can fluctuate relying on the particular mannequin of your washer. Nonetheless, usually, listed below are the steps to comply with:
- Unplug the washer from {the electrical} outlet for security causes.
- Flip off the water provide valves related to the washer.
- Tilt the washer again barely to entry the underside of the unit.
- Find the drain pump, which is usually located on the entrance or backside of the washer. It might be coated by a plastic panel that must be eliminated.
- Disconnect the hoses and wires related to the drain pump. You should definitely observe how they’re related for straightforward reassembly later.
- Take away the bolts or screws that safe the drain pump to the washer.
- Fastidiously pull the drain pump out of its housing. Examine the pump for any harm or particles that could be inflicting it to malfunction.
Eradicating the Drain Hose
Find the drain hose in the back of the washer, usually hid behind a small entry panel. Open the panel to reveal the hose.
Disconnect the drain hose from the drain pump by gently pulling it away. A clamp or fastener might safe the hose, so be cautious when detaching it.
Pull the drain hose utterly out of the washer, guaranteeing to empty any remaining water into an appropriate container.
Non-compulsory Steps for Cussed Hose Removing
If the drain hose is tightly caught or clogged, contemplate these extra steps:
| Concern | Resolution |
|---|---|
| Cussed clamp | Use pliers to fastidiously loosen the clamp with out damaging the hose. |
| Clogged hose | Clear particles by working a skinny wire or brush by way of the hose and flushing with water. |
| Broken hose | Change the broken part of the hose with a brand new one of many similar measurement and materials. |
Inspecting the Impeller
Upon getting eliminated the drain pump, it’s essential to examine the impeller for any harm or blockage. The impeller is a important part of the drain pump chargeable for spinning and draining water away from the washer. If the impeller is broken or blocked, it may compromise the effectivity of the drain pump and result in additional points.
To completely examine the impeller:
- Fastidiously take away the impeller from the drain pump housing.
- Look at the impeller for any cracks, breaks, or deformities. Even minor harm can have an effect on its performance.
- Verify for any international objects or particles caught within the impeller blades or the housing. These obstructions can block the sleek circulation of water and hinder the impeller’s rotation.
- Examine the impeller shaft for any indicators of wear and tear or corrosion. Extreme friction or rust can result in problem in spinning and eventual failure.
- If seen harm or blockage is current, the impeller might must be changed or cleaned completely.
- All the time use real LG components when changing the impeller to make sure optimum efficiency and security.
Common inspection and upkeep of the impeller are important for guaranteeing the longevity and correct functioning of your LG washer.
Reinstalling the Drain Pump
8. Change the Screw
Find the screw that holds the drain pump in place. It’s usually situated on the backside of the pump. Align the screw with the outlet within the mounting bracket and tighten it securely utilizing a screwdriver. To make sure a safe match, gently tug on the pump as soon as screwed to verify it’s tightly in place.
9. Reconnect the Wiring
Find {the electrical} connector for the drain pump. It’s normally a small, plastic connector with two or three wires. Align the connector with the corresponding plug on the drain pump and push it firmly till it clicks into place. Double-check that the connector is safe and the wires are usually not free or uncovered.
10. Reinstall the Kick Panel
Elevate the kick panel again into place, aligning it with the underside of the washer cupboard. Push the kick panel firmly into place till it snaps into place. Make sure that the drain pump is just not obstructed by the kick panel and that the panel covers the pump utterly.
The way to Take away Drain Pump on LG Mannequin WT1101CW
Instruments you will want:
- Phillips head screwdriver
- Flat head screwdriver
- Bucket or bowl
Directions:
- Unplug the washer from {the electrical} outlet.
- Flip off the water provide to the washer.
- Open the washer door and take away the garments.
- Find the drain pump on the backside of the washer. It’s normally situated on the best facet.
- Disconnect the hoses from the drain pump.
- Take away the screws that maintain the drain pump in place.
- Pull the drain pump out of the washer.
- Clear the drain pump and change it if crucial.
- Reassemble the washer within the reverse order.
Folks Additionally Ask
How do I do know if my LG Washer Drain Pump is dangerous?
There are a couple of indicators that your LG washer drain pump could also be dangerous:
- Your washer is just not draining correctly.
- Your washer is making a loud noise when it’s draining.
- Your washer is leaking water from the underside.
Can I change the drain pump on my LG Washer myself?
Sure, you may change the drain pump in your LG washer your self. Nonetheless, it is very important observe that it is a troublesome restore and may solely be tried by somebody with expertise in equipment restore.
