Featured Picture: Image of a toilet being removed from a bathroom floor
Bored with your outdated, outdated bathroom taking on priceless rest room area? Able to improve to a smooth, fashionable mannequin that may make your rest room an oasis of leisure? In that case, it is time to discover ways to take away a rest room. Do not let the considered plumbing work intimidate you; with the suitable instruments and slightly know-how, you may sort out this DIY undertaking in a couple of hours. On this complete information, we’ll stroll you thru the whole course of, from gathering the mandatory supplies to detaching the bathroom from the ground, eradicating the outdated wax ring, and putting in your new throne. So, seize your toolbox and let’s get began on remodeling your rest room!
Earlier than you start, it is important to assemble all the mandatory instruments and supplies. You may want a rest room wrench, adjustable wrench, utility knife, bucket, sponge, bathroom wax ring, new bathroom bolts, and a brand new bathroom. Moreover, in case your bathroom is linked to a bidet, you may additionally want a bidet provide line. Upon getting all the things you want, it is time to put together the lavatory for the duty forward. Unfold out outdated towels or plastic sheeting round the bathroom to guard the ground from water and particles. Shut off the water provide to the bathroom by turning the valve behind it clockwise. Flush the bathroom to empty the tank and bowl. Lastly, disconnect the water provide line from the bathroom’s fill valve.
Now that the preparatory steps are out of the way in which, it is time to detach the bathroom from the ground. Begin by unbolting the bathroom bolts utilizing the bathroom wrench. Maintain the nuts in place with the adjustable wrench whereas loosening the bolts. As soon as the bolts are unfastened, fastidiously carry the bathroom straight up and off the flange. Be conscious to not harm the ground or the bathroom itself. If the bathroom is caught, gently rock it backwards and forwards whereas pulling up. As soon as the bathroom is eliminated, you may clear the flange floor with a sponge and utility knife to take away any outdated wax ring residue. Lastly, apply a brand new wax ring to the flange and place the brand new bathroom on high, making certain the bolts align with the holes within the flange.
Disconnecting the Water Provide
Earlier than starting any work in your bathroom, it’s essential to disconnect the water provide to forestall water from flowing into the bowl and inflicting a large number. Comply with these steps to securely disconnect the water provide:
Supplies You may Want:
| Merchandise | Description |
|---|---|
| Wrench or adjustable pliers | For turning the shutoff valve |
| Material or towel | For absorbing any water |
Step-by-Step Directions:
1. Find the Shutoff Valve:
Determine the water shutoff valve, which is often positioned beneath the bathroom close to the ground or behind the bathroom tank. The valve will often have a deal with that may be turned by hand. If you happen to can not find the shutoff valve, verify the primary water provide valve in your dwelling, which is often discovered within the basement, utility room, or beneath a sink.
In case your bathroom has two provide traces, one for the bathroom tank and one for the bidet (if relevant), you have to to show off each valves.
2. Flip Off the Water Provide:
Use a wrench or adjustable pliers to slowly flip the deal with of the shutoff valve clockwise till it stops. Don’t overtighten the valve. You need to really feel some resistance because the valve closes.
If the valve is tough to show, apply a fabric or towel across the deal with for higher grip. Keep away from utilizing extreme drive, as you possibly can harm the valve.
3. Flush the Bathroom:
As soon as the water provide is turned off, flush the bathroom to empty the water from the tank and bowl. This may assist forestall any remaining water from inflicting a large number through the elimination course of.
Flushing and Emptying the Bathroom Bowl
Earlier than eradicating the bathroom, it is essential to flush and empty the bathroom bowl to forestall any spills or messes through the course of. Comply with these steps to take action:
Step 1: Flush the Bathroom
Press the flush lever down and permit the bathroom to flush fully. This may drain the water from the bowl.
Step 2: Cease the Water Provide
Find the water provide valve, which is often behind the bathroom close to the ground. Flip the valve clockwise to close off the water provide to the bathroom.
Step 3: Drain the Tank
Press the flush lever once more to empty any remaining water from the tank. If the tank would not empty fully, use a moist/dry vacuum to take away the remainder of the water.
Step 4: Use a Plunger
If there’s any water remaining within the bowl, use a plunger to extract it. Place the plunger over the drain gap and pump it a number of instances to create suction and drive the water out.
Step 5: Dry the Bathroom Bowl
Use towels or a moist/dry vacuum to dry the bathroom bowl fully. This may forestall any water from spilling out through the elimination course of.
| Hazard | Precaution |
|---|---|
| Heavy weight | Raise with a companion or use a dolly. |
| Sharp edges | Put on gloves and security glasses. |
| Water harm | Shut off water provide and drain the bathroom. |
| Hazardous waste | Get rid of outdated wax ring and gaskets correctly. |
Lifting the Tank
To soundly carry the bathroom tank, comply with these steps:
- Flip off the water provide: Find the water provide valve behind the bathroom and switch it clockwise to close off the water movement.
- Disconnect the water provide line: Utilizing a wrench, loosen the nut that connects the water provide line to the tank. Permit the remaining water to empty out.
- Take away the tank bolts: The bathroom tank is secured with two bolts that run via the bottom of the tank and into the bottom of the bathroom bowl. Utilizing a wrench, loosen and take away the bolts.
- Raise the tank: Fastidiously carry the tank straight up and off the bathroom bowl. Keep away from tilting or jolting the tank, as it could break or harm the bathroom base.
Ideas:
-
If the tank is heavy, ask for help from one other individual.
-
Place a towel or fabric on the ground beneath the bathroom base to guard it from scratches.
-
If the bolts are rusted or caught, apply penetrating oil to loosen them.
Disconnecting the Fill Valve
Step 1: Flip off the water provide. Find the water shutoff valve behind the bathroom and switch it clockwise to close off the water provide. If there is no such thing as a shutoff valve, you have to to show off the primary water provide to the home.
Step 2: Flush the bathroom to empty the tank. Maintain down the flush lever till all of the water drains from the tank.
Step 3: Disconnect the water provide line. Use an adjustable wrench to loosen the nut that connects the water provide line to the fill valve. As soon as the nut is unfastened, you may pull the water provide line off the fill valve.
Step 4: Take away the fill valve nut. The fill valve nut is positioned on the underside of the fill valve. Use a wrench to loosen the nut after which take away it by hand.
Step 5: Take away the fill valve. As soon as the fill valve nut is eliminated, you may pull the fill valve straight as much as take away it from the tank. Watch out to not harm the fill valve o-ring when eradicating it.
Fill Valve O-Ring Alternative
The fill valve o-ring is a small rubber gasket that seals the fill valve to the underside of the tank. Over time, the o-ring can turn into worn or broken, which may trigger leaks. In case you are experiencing leaks from the underside of the fill valve, you might want to interchange the o-ring.
To switch the fill valve o-ring, merely take away the outdated o-ring and substitute it with a brand new one. The brand new o-ring must be the identical dimension and form because the outdated o-ring.
| Fill Valve O-Ring Sizes |
|---|
| 1/2 inch |
| 3/4 inch |
| 1 inch |
Eradicating the Seat and Lid
To take away the bathroom seat and lid, comply with these steps:
- Find the bolts: The bolts that maintain the seat in place are usually positioned behind the bathroom bowl, on both aspect of the hinges.
- Loosen the nuts: Utilizing a wrench, flip the nuts that safe the bolts counterclockwise to loosen them.
- Raise the seat: As soon as the nuts are unfastened, carry the bathroom seat straight up and off the bowl.
- Take away the lid: If the bathroom lid is separate from the seat, merely carry it straight as much as take away it.
- Examine the bolts and washers: Test the bolts and washers for any indicators of harm or rust. If they’re broken, they need to get replaced.
- Clear the hinges: Use a humid fabric to scrub the hinges the place the seat was connected. This may assist forestall corrosion and make it simpler to reattach the seat later.
Reattaching the Seat and Lid
To reattach the bathroom seat and lid, merely comply with the steps above in reverse order:
- Align the seat and lid with the hinges.
- Place the bolts via the holes within the hinges.
- Tighten the nuts by hand till they’re cosy.
- Use a wrench to tighten the nuts additional, however watch out to not overtighten them.
- As soon as the nuts are tight, double-check that the seat and lid are safe.
Unbolting the Bathroom Base
Unbolting the bathroom base is a vital step within the elimination course of. Here is an in depth information on the right way to proceed:
1. **Find the Base Bolts:** They’re often positioned on the base of the bathroom, beneath the flange. Test for 2 bolts about 6 inches aside.
2. **Collect Instruments:** You may want a wrench or adjustable pliers for loosening the bolts.
3. **Disconnect the Water Provide:** Flip off the water valve behind the bathroom and flush the tank to take away any remaining water.
4. **Apply Lubricant:** Spray a penetrating oil or lubricant onto the bolts to loosen any rust or corrosion.
5. **Unscrew the Bolts:** Use the wrench or pliers to loosen the bolts by turning them counterclockwise. In the event that they’re caught, apply extra lubricant and take a look at once more.
6. **Take away the Bolts:** As soon as loosened, fully unscrew the bolts by hand and eliminate them.
7. **Superior Tip for Cussed Bolts:
| State of affairs | Resolution |
|---|---|
| Bolt head rounded off | Use locking pliers or a hack noticed to take away the bolt head. |
| Bolt snapped in half | Drill out the remaining bolt and substitute it with a brand new one. |
| Bolts rusted past restore | Lower the bolts with a hacksaw and use a chisel to pry off the bathroom base. |
Gently Rocking the Bathroom
To softly rock the bathroom and loosen it:
| Step | Description |
|---|---|
| 1 | Place your self in entrance of the bathroom, dealing with the tank. |
| 2 | Maintain either side of the bathroom bowl close to the bottom, simply behind the tank bolts. |
| 3 | Grip the bowl firmly and gently rock it backwards and forwards, aspect to aspect. |
| 4 | Enhance the strain and drive barely over a number of rocking motions. |
| 5 | Proceed rocking the bathroom till it begins to maneuver. |
| 6 | As soon as it begins to maneuver, step by step enhance the rocking drive to loosen it additional. |
| 7 | If the bathroom stays caught, strive utilizing a penetrating lubricant to the bottom of the bowl. |
| 8 | Apply the lubricant to either side of the bowl, close to the bottom, and let it penetrate for a couple of minutes.
Tip: Use a lubricant particularly designed for lavatory fixtures to keep away from damaging the bathroom. |
| 9 | Resume rocking the bathroom after permitting the lubricant to penetrate. |
| 10 | Repeat steps 3-7 till the bathroom is unfastened sufficient to take away. |
| Step | Description |
|---|---|
| 1 | Take away the nuts from the bolts holding the bathroom to the ground. |
| 2 | Grasp the bathroom bowl on either side and carry it straight up. |
| 3 | Set the bathroom down on a bit of cardboard or a towel to guard the ground. |
If there may be any harm, you have to to restore it earlier than you may set up a brand new bathroom.
Cleansing the Bathroom Flange and Ground
1. Collect obligatory instruments and supplies:
- Bathroom bowl cleaner
- Sponge or fabric
- Bucket
- Plunger
- Gloves
2. Shut off water provide and flush bathroom:
- Find the water provide valve behind the bathroom and switch it clockwise to shut.
- Flush the bathroom to empty the bowl.
3. Take away bathroom bowl:
- Grip the bathroom bowl firmly and rock it gently to loosen it from the flange.
- Raise the bathroom straight up and away from the flange.
- Get rid of the bowl correctly.
4. Clear the bathroom flange:
- Scrub the bathroom flange completely with the bathroom bowl cleaner and sponge.
- Take away any particles or mineral buildup.
5. Clear the ground:
- Use a bucket of heat water and a mop or sponge to scrub the ground across the flange.
- Scrub any stains or particles completely.
6. Test flange for cracks or leaks:
- Examine the bathroom flange for any cracks or leaks.
- If cracks are discovered, apply a sealant to restore them.
7. Substitute flange if obligatory:
- If the flange is broken past restore, substitute it with a brand new one.
- Comply with the producer’s directions for set up.
8. Lubricate the flange:
- Apply a skinny layer of petroleum jelly or wax to the flange to scale back friction and forestall leaks.
9. Set up new wax ring:
- Place a brand new wax ring on the flange, aligning it with the bolt holes.
- Press the ring firmly into place.
10. Reinstall bathroom bowl:
- Fastidiously decrease the bathroom bowl onto the flange, aligning the bolts with the holes.
- Hand-tighten the bolts and use a wrench to safe them additional.
- Don’t overtighten the bolts as this could harm the flange or bowl.
| Tip | Motive |
|---|---|
| Put on gloves when dealing with chemical compounds. | Shield your fingers from irritation. |
| Use a moist/dry vacuum to take away giant quantities of water. | Velocity up the cleansing course of. |
| Permit the ground to dry fully earlier than reinstalling the bathroom. | Forestall water harm or mildew progress. |
Take away a Bathroom
Eradicating a rest room is a comparatively easy plumbing process that may be accomplished in a couple of hours. By following these steps, you may safely and successfully take away your outdated bathroom and put together for the set up of a brand new one.
Step 1: Collect Your Instruments and Supplies
Earlier than you start, collect the next instruments and supplies:
- Adjustable wrench
- Plumber’s putty knife
- Bucket
- Sponge or rags
- New wax ring (if changing)
Step 2: Flip Off the Water Provide
Find the water provide valve behind the bathroom and switch it off. Flush the bathroom to empty the remaining water from the tank and bowl.
Step 3: Disconnect the Water Provide Line
Use an adjustable wrench to loosen the nuts connecting the water provide line to the fill valve and the bathroom tank. Fastidiously take away the road.
Step 4: Take away the Bathroom Tank
Find the bolts connecting the bathroom tank to the bowl. Use an adjustable wrench to loosen the bolts, then fastidiously carry the tank off the bowl and set it apart.
Step 5: Take away the Bathroom Bowl
Loosen the nuts connecting the bathroom bowl to the ground flange. Fastidiously rock the bathroom bowl backwards and forwards till it loosens, then carry it straight up and take away it.
Step 6: Clear the Bathroom Base
Use a plumber’s putty knife to take away any outdated wax ring or sealant from the bathroom base and ground flange. Clear the surfaces completely to make sure a correct seal for the brand new bathroom.
Step 7: Set up the New Bathroom
Place a brand new wax ring on the bathroom base. Fastidiously carry the brand new bathroom bowl and set it on the ground flange, aligning the bolts with the holes within the base.
Step 8: Reinstall the Bathroom Tank
Decrease the bathroom tank onto the bowl and tighten the bolts to safe it. Reconnect the water provide line to the fill valve.
Step 9: Flip On the Water Provide
Activate the water provide valve behind the bathroom. Test for any leaks round the bathroom base or tank.
Folks Additionally Ask
How do I take away a rest room that’s bolted to the ground?
Comply with the steps outlined on this information, together with loosening the bolts connecting the bathroom bowl to the ground flange.
Can I take away a rest room myself?
Sure, you may take away a rest room your self with the suitable instruments and supplies. Nonetheless, in case you are not snug with plumbing duties, it’s all the time advisable to seek the advice of a licensed plumber.
What’s a wax ring and why is it used?
A wax ring is a waterproof sealant that creates a leak-proof seal between the bathroom base and the ground flange. It helps forestall water from leaking out and inflicting harm.
