Binding is the ultimate contact that offers your quilt a completed look. It can be used so as to add an ornamental aspect to your quilt. There are lots of alternative ways to stitch binding on a quilt, however the commonest methodology is to make use of a machine. This methodology is comparatively straightforward to do and will be accomplished in just a few hours.
Earlier than you start, you have to to collect your provides. You will have:
– Quilt binding
– Matching thread
– Stitching machine
– Iron and ironing board
– Scissors
– Measuring tape or ruler
After getting gathered your provides, you possibly can start stitching the binding in your quilt. First, you have to to measure and reduce the binding strips. The binding strips ought to be reduce to the size of the sting of your quilt, plus 2 inches. For instance, in case your quilt is 50 inches vast, you have to to chop two binding strips which can be every 52 inches lengthy. Subsequent, you have to to fold the binding strips in half lengthwise and press them. It will assist to maintain the binding strips from fraying.
Making ready the Binding
Earlier than you begin stitching, it is vital to organize your binding strips. It will make sure that they’re the right measurement and form, and that they are going to be straightforward to work with.
**Step 1: Lower the material strips.**
Lower strips of cloth which can be 2 1/2 inches vast and the size of the quilt’s edges. You will have sufficient strips to go across the total perimeter of the quilt, plus just a few further for overlap. For a quilt with a 40-inch sq. prime, you have to roughly 16 strips, every measuring 2 1/2 inches by 50 inches.
**Step 2: Be a part of the strips.**
Sew the strips collectively finish to finish, utilizing a 1/4-inch seam allowance. Press the seams open.
**Step 3: Fold the binding in half lengthwise.**
Fold the binding strip in half lengthwise, matching the uncooked edges. Press the fold.
**Step 4: Miter the corners.**
To create a mitered nook, fold the binding strip at a 45-degree angle on the nook of the quilt. Unfold the binding and press the crease. Fold the binding over the quilt edge and align the uncooked edges. Sew the binding in place, utilizing a 1/4-inch seam allowance.
**Step 5: Trim the surplus binding.**
As soon as the binding is sewn in place, trim any extra cloth from the start and finish of the strip. Your binding ought to now be the identical size because the quilt’s edges.
| Materials | Quantity |
|---|---|
| Cloth strips (2 1/2 inches vast) | Size of quilt’s edges + further for overlap |
| Thread | Matching the material |
| Iron and ironing board | – |
Stitching the Binding to the Quilt High
After getting your binding strips sewn collectively, it is time to sew them to the quilt prime. This may be finished by hand or by machine. When you’re stitching by hand, use a small, sharp needle and a robust thread. Start by folding the binding strip in half and aligning the uncooked edges with the uncooked edges of the quilt prime. Sew a working sew alongside the folded fringe of the binding strip, catching the quilt prime as you go. Once you attain the top of the binding strip, overlap the ends by about 1 inch and stitch them collectively.
When you’re stitching by machine, use a zipper foot or a binding foot. It will show you how to to maintain the binding straight and even. Start by folding the binding strip in half and aligning the uncooked edges with the uncooked edges of the quilt prime. Sew a straight sew alongside the folded fringe of the binding strip, catching the quilt prime as you go. Once you attain the top of the binding strip, overlap the ends by about 1 inch and stitch them collectively.
Here’s a desk summarizing the steps for stitching the binding to the quilt prime:
| Step | Description |
|---|---|
| 1 | Fold the binding strip in half and align the uncooked edges with the uncooked edges of the quilt prime. |
| 2 | Sew a working sew alongside the folded fringe of the binding strip, catching the quilt prime as you go. |
| 3 | Once you attain the top of the binding strip, overlap the ends by about 1 inch and stitch them collectively. |
Mitering the Corners
Mitering the corners is a way used to create a neat and professional-looking end when binding a quilt. It entails folding the binding cloth on the corners to kind a 45-degree angle, which prevents any bulk or extra cloth from accumulating on the corners.
Folding the Binding
To fold the binding for mitering the corners, you have to to:
-
Unfold the binding at one nook.
-
Make a 45-degree reduce throughout the unfolded fringe of the binding.
-
Fold the reduce fringe of the binding over the nook of the quilt, aligning the uncooked edges.
-
Press the binding firmly in place.
Ending the Mitered Nook
As soon as the binding is folded on the nook, you have to to complete the mitered nook by:
-
Folding the remaining binding over the mitered nook, overlapping the folded edge.
-
Urgent the binding firmly in place.
-
Stitching the binding in place alongside the sting of the quilt, catching each layers of the binding.
| Step | Description |
|---|---|
| 1 | Unfold binding and reduce 45-degree angle |
| 2 | Fold reduce edge over nook, aligning uncooked edges |
| 3 | Fold remaining binding over mitered nook, overlapping |
| 4 | Press and stitch binding in place |
Stitching the Binding on the Again
As soon as the binding is sewn across the entrance of the quilt, it is time to sew it down on the again. This may be finished by hand or machine.
By Hand
To stitch the binding down by hand, use a small, sharp needle and thread that matches the colour of the binding. Begin by folding the binding over the sting of the quilt, in order that the folded edge is even with the uncooked fringe of the quilt. Use small, even stitches to stitch the binding down. The stitches ought to be about 1/4 inch aside.
By Machine
To stitch the binding down by machine, use a blind hem sew. This sew will create a small, invisible sew that can maintain the binding down securely.
Utilizing a Blind Hem Foot
In case your stitching machine has a blind hem foot, use it to stitch the binding down. The blind hem foot will show you how to to create a neat, even sew.
To make use of a blind hem foot, comply with these steps:
| Step | Description |
|---|---|
| 1 | Fold the binding over the sting of the quilt, in order that the folded edge is even with the uncooked fringe of the quilt. |
| 2 | Connect the blind hem foot to your stitching machine. |
| 3 | Set the sew width to the narrowest setting. |
| 4 | Begin stitching on the nook of the quilt. Maintain the binding taut as you sew. |
| 5 | Proceed stitching across the quilt, conserving the binding taut. |
| 6 | Once you attain the start line, overlap the uncooked edges of the binding by about 1 inch. |
| 7 | Sew the binding down, overlapping the start line by about 1 inch. |
| 8 | Trim any extra binding. |
Ending the Binding
Machine Stitching
Machine stitching is a fast and straightforward strategy to end the binding. Use a blind hem presser foot to sew a slim, invisible sew alongside the within fringe of the binding. This methodology is very appropriate for flat, skinny bindings.
Hand Stitching
Hand stitching is a extra conventional methodology that offers a wonderful, virtually invisible end. Use a small, sharp needle and an identical thread. Sew across the edges of the binding, taking small, even stitches.
Glue Basting
Glue basting is a time-saving approach that entails making use of cloth glue to the again of the binding. The glue will maintain the binding in place whilst you sew it down by machine or hand. This methodology is greatest suited to heavy or cumbersome bindings.
Whipstitching
Whipstitching is an ornamental sew that can be utilized to complete the binding. Use a single strand of embroidery floss or yarn and a darning needle. Sew by way of the binding, catching the quilt prime and batting in every sew. This methodology is very appropriate for ornamental bindings.
Steps to Machine Sew Binding
| Step | Directions |
|---|---|
| 1 | Fold the binding over the uncooked fringe of the quilt, mitering the corners. |
| 2 | Connect a blind hem presser foot to your stitching machine. |
| 3 | Set the sew size to 2-3 mm. |
| 4 | Sew across the perimeter of the quilt, following the within fringe of the binding. |
| 5 | Maintain the quilt taut as you sew to forestall puckering. |
Hand Stitching the Binding
Hand stitching the binding is a superb choice if you do not have a stitching machine or if you happen to want the standard look of hand-sewn binding. Listed here are the steps:
Supplies you will want:
| Merchandise | Amount |
|---|---|
| Binding cloth | Sufficient to go across the quilt with a 2-inch overlap |
| Needle | A pointy needle with a small eye |
| Thread | Sturdy thread in a shade that matches the binding cloth |
| Thimble | Optionally available, however useful to guard your fingers |
Step 1: Put together the binding
Fold the binding cloth in half lengthwise, and press it. It will create a crease down the middle of the material.
Step 2: Pin the binding to the quilt
Fold the uncooked fringe of the binding over the uncooked fringe of the quilt by 1 inch. Pin the binding in place, beginning at a nook.
Step 3: Sew the binding
Use a small, even sew to stitch the binding to the quilt. Begin on the nook, and stitch across the total quilt, overlapping the binding on the corners.
Step 4: Miters the Corners
To create a neat {and professional} end on the corners, you will have to miter the binding. This is a step-by-step information:
- Once you attain a nook, cease stitching 1/2 inch from the sting of the quilt.
- Fold the binding again on itself at a 45-degree angle.
- Trim the surplus cloth to create a diagonal edge.
- Unfold the binding and proceed stitching from the nook.
- Repeat this course of at every nook.
Step 5: End the Binding
As soon as you have sewn across the total quilt, overlap the binding by 2 inches. Fold the surplus binding to the again of the quilt and tuck it underneath the primary few stitches.
Step 6: Blind Sew the Binding
To complete the binding, use a blind sew to stitch it all the way down to the quilt. This is an in depth information:
- Thread your needle with a double strand of thread and knot the ends.
- Begin stitching on the nook of the quilt, on the again of the material.
- Insert the needle into the binding, simply behind the earlier sew.
- Deliver the needle up by way of the quilt, about 1/4 inch from the fold.
- Insert the needle again into the binding, simply behind the earlier sew.
- Proceed stitching across the total quilt, taking small, even stitches.
- Once you attain the top, knot the threads and trim any extra.
Utilizing a Machine to Sew the Binding
7. Machine Stitching
As soon as the binding is pinned across the quilt, it is time to sew it down. This is how:
- Set your stitching machine to a slim zigzag sew (about 1.5mm vast). Regulate the sew size to about 2.5mm.
- Begin stitching on the nook of the quilt, aligning the uncooked fringe of the binding with the folded fringe of the quilt.
- Maintain the binding taut as you sew, guaranteeing it stays folded over and flat.
- Proceed stitching across the perimeter of the quilt, ensuring to safe the threads originally and finish of every seam.
- As you sew, trim any extra binding that extends past the sting of the quilt.
- Once you attain the mitered corners, rigorously sew over them, guaranteeing the binding stays flat and safe.
- To make the stitching extra ornamental, you possibly can modify the zigzag sew settings to create distinctive patterns or textures.
| Sew Width | Sew Size |
|---|---|
| 1.5mm | 2.5mm |
Customizing the Binding
Selecting the Binding Cloth
The binding cloth ought to complement the quilt’s total design and shade scheme. Think about using a coordinating cloth from the quilt or a contrasting shade for a bolder look.
Width and Amount of Binding
The width of the binding will decide the completed measurement of the binding. A typical width is 2.5 inches (6.4 cm), however you possibly can modify it to fit your choice. The quantity of binding you will want will depend on the perimeter of the quilt.
| Quilt Measurement | Binding Size |
|---|---|
| 40 x 60 inches | 6.3 yards |
| 50 x 70 inches | 7.9 yards |
| 60 x 80 inches | 9.5 yards |
Sorts of Binding
There are a number of various kinds of binding, together with:
- Single Fold Binding: The only sort of binding, the place the material is folded as soon as over the sting of the quilt.
- Double Fold Binding: The material is folded twice over the sting of the quilt, making a thicker and extra sturdy binding.
- Bias Binding: Lower on the diagonal of the material, bias binding supplies a stretchy and versatile binding that’s good for curved edges.
- Flange Binding: An ornamental binding that contains a folded edge that extends past the quilt’s floor.
Ornamental Touches
So as to add a private contact to your binding, take into account incorporating ornamental parts similar to:
- Appliqué: Attaching small items of cloth or elaborations to the binding.
- Embroidery: Stitching ornamental designs onto the binding.
- Quilting: Machine or hand-quilting the binding to create a novel texture.
Troubleshooting Binding Points
Uneven or wavy binding
Trigger: Mismatched seam allowances or inaccurate chopping can result in uneven or wavy binding. Additionally, if the material was not stretched evenly when it was sewn, it could trigger the binding to be wavy.
Answer: Be certain that the seam allowances are equal on either side of the binding strip and that the material is reduce precisely. When stitching the binding, take care to stretch the material evenly in order that it lays flat.
Cumbersome or puckered corners
Trigger: An excessive amount of cloth on the corners can create bulkiness or puckering. Moreover, not mitering or trimming the corners correctly may result in these points.
Answer: Miter the corners to cut back bulk and guarantee a clean transition. Trim any extra cloth on the corners to forestall puckering. It’s advisable to apply on scrap cloth earlier than trying to bind a quilt.
Binding not laying flat or uneven
Trigger: Binding that’s too unfastened or too tight can forestall it from laying flat or evenly. Overlapping the binding strips an excessive amount of or not sufficient may contribute to this concern.
Answer: Regulate the strain of the stitching machine in order that the binding is securely hooked up however not too tight. Be certain that the binding strips are overlapped by a constant width (usually 1/2 inch to three/4 inch). Use a binding clip or pin to carry the binding in place as you sew.
Finalizing the Quilt
Attaching the Binding
As soon as the binding strips have been sewn collectively right into a steady strip and folded in half, it is time to connect it to the quilt. Begin by pinning the binding to the sting of the quilt, with the folded edge aligned with the uncooked fringe of the quilt. Use small, sharp pins and pin perpendicular to the sting of the quilt.
Mitering the Corners
Once you attain a nook, you will have to miter the binding to create a neat and safe nook. To miter a nook, fold the binding at a 45-degree angle on the nook, then trim off the surplus. Align the folded fringe of the binding with the uncooked fringe of the quilt and proceed pinning.
Becoming a member of the Binding Ends
As soon as you have hooked up the binding all the best way across the quilt, you will want to affix the ends. Overlap the ends of the binding by about 1 inch, then fold the overlap in half and trim off the surplus. Align the folded edges of the binding and pin them collectively.
High-Stitching the Binding
The ultimate step is to top-stitch the binding to safe it to the quilt. Use a small sew size and sew near the folded fringe of the binding. You may both sew by hand or by machine. When you’re stitching by machine, use a strolling foot to assist feed the quilt evenly by way of the machine.
Strategies for Becoming a member of the Binding Ends
There are a number of totally different strategies for becoming a member of the ends of the binding. Listed here are just a few widespread strategies:
| Technique | Description |
|---|---|
| Overlap | Overlap the ends of the binding by about 1 inch, then fold the overlap in half and trim off the surplus. |
| Mitred | Fold the ends of the binding at a 45-degree angle, then trim off the surplus. Align the folded edges of the binding and stitch them collectively. |
| Bias Strip | Lower a bias strip of cloth that’s the similar width because the binding. Fold the ends of the binding over the bias strip and stitch them collectively. |
How To Sew Binding On Quilt
Stitching binding on a quilt is a good way to complete the perimeters and provides it a elegant look. It is also a comparatively straightforward course of that may be finished by hand or machine. Listed here are the steps on how you can sew binding on a quilt:
- Lower the binding strips. The binding strips ought to be 2 1/2 inches vast and reduce to the size of the quilt’s edges. You will have sufficient strips to go across the total perimeter of the quilt, plus just a few further inches for overlap.
- Be a part of the binding strips. Sew the binding strips collectively end-to-end utilizing a 1/4-inch seam allowance. Press the seam allowances open.
- Connect the binding to the quilt. Pin the binding to the quilt, proper sides collectively, and align the uncooked edges. Use a 1/4-inch seam allowance to stitch the binding to the quilt. Press the seam allowances open.
- Fold the binding over the quilt edge. Fold the binding over the quilt edge and press it down. Fold the binding over once more and press it down once more. Use a blind sew or a topstitch to stitch the binding all the way down to the quilt.
- Trim the surplus binding. Trim the surplus binding near the quilt edge.
Folks Additionally Ask About How To Sew Binding On Quilt
How do you sew binding on a quilt by hand?
There are a number of components that may have an effect on how lengthy it takes to stitch quilt binding on by hand.
– The dimensions of the quilt: A bigger quilt will take longer to bind than a smaller quilt.
– The kind of binding: Some varieties of binding, similar to bias binding, are harder to stitch on than others. The kind of cloth used for the binding may have an effect on how lengthy it takes to stitch on.
– The ability stage of the individual stitching the binding: Somebody who’s extra skilled will be capable of sew the binding on extra rapidly than somebody who’s new to quilting.
–The tactic used to stitch the binding on: There are a number of totally different strategies that can be utilized to stitch binding on a quilt by hand. Some strategies are quicker than others.
Are you able to machine sew quilt binding?
Sure, you possibly can machine sew quilt binding. It’s the commonest strategy to sew binding on a quilt as a result of it’s a lot quicker than hand stitching. There are just a few alternative ways to machine sew quilt binding, however the commonest methodology is to make use of a 1/4-inch seam allowance and stitch the binding to the quilt prime first. Then, fold the binding over the quilt edge and stitch it down once more, utilizing a blind sew or a topstitch.
How do you end the corners when stitching binding on a quilt?
When stitching binding on a quilt, there are two foremost methods to complete the corners:
– Mitered corners: Mitered corners are created by folding the binding over at a 45-degree angle on the corners. This offers the quilt a extra skilled end.
– Bias binding: Bias binding is reduce on the bias, which signifies that it’s reduce at a 45-degree angle to the grain of the material. This offers the binding a stretchy high quality, which makes it simpler to stitch round curves and corners.
