Quilting is a ravishing and rewarding craft, and including the binding is the ultimate contact that brings all of it collectively. However in the event you’ve by no means sewn on quilt binding earlier than, it could actually look like a frightening job. Don’t be concerned, although! With a little bit endurance and the correct directions, you may simply grasp this important quilting talent.
Earlier than you begin, it is necessary to assemble your supplies. You may want:
– Quilt binding strips
– Matching thread
– Stitching machine
– Iron and ironing board
– Scissors
– Measuring tape or ruler
– Pins
After getting your supplies, you are prepared to begin stitching! Start by measuring and reducing your binding strips to the specified size. The size of every strip will fluctuate relying on the scale of your quilt, so make sure you measure rigorously. After getting lower your strips, be a part of them collectively utilizing a diagonal seam. Press the seam open after which fold the binding strip in half lengthwise, urgent the fold. Now you are prepared to stitch the binding to your quilt.
Safe the Binding
6. Trim the Extra Binding and Press:
• Trim the surplus binding to 1/2 inch from the nook.
• Flip the binding to the again of the quilt and press it flat.
• Fold the binding over the quilt edge and press it once more.
• Mitre the corners by folding one aspect of the binding over the opposite at a 45-degree angle.
• Trim the surplus binding and press the nook flat.
• Repeat for all 4 corners.
• High-stitch the binding to the quilt by stitching a straight line near the folded edge.
• Use a small sew size and a machine needle that’s applicable for the material.
• Begin and cease stitching 1/2 inch from the nook.
• Safe the threads by backstitching or tying them off.
Ending Touches:
• Trim any free threads.
• Wash and dry the quilt to melt the binding and provides it a completed look.
Trim and End the Binding
Now that your binding is sewn on, it is time to trim and end it. Listed here are the steps:
Trim the Binding
Use sharp scissors to trim the surplus binding from the corners. Watch out to not lower into the quilt prime.
Fold the Binding over the Edges
Fold the binding over the uncooked edges of the quilt prime and press it down. Use a binding clip or pin to carry the binding in place.
Miter the Corners
To create a professional-looking end, miter the corners of the binding. This is how:
- Fold the binding over the nook and crease it.
- Unfold the binding and trim the surplus at a 45-degree angle.
- Refold the binding and press it down.
Safe the Binding
Now it is time to safe the binding to the quilt. You are able to do this by hand or machine.
By Hand
Use a needle and thread to whip sew the binding to the quilt prime. Begin in the course of one aspect and work your approach across the quilt.
By Machine
When you have a stitching machine with a strolling foot, you should utilize it to machine-stitch the binding to the quilt prime. It is a quicker and simpler methodology than hand-stitching.
Ending Touches
As soon as the binding is secured, you may add ending touches akin to quilting or gildings. That is non-obligatory, but it surely may give your quilt a extra polished look.
Tips on how to Sew On Quilt Binding
Quilt binding is the ultimate step within the quilting course of, and it serves two functions: to safe the perimeters of the quilt and to present it a completed look. There are a number of other ways to stitch on quilt binding, however the commonest methodology is to make use of a blind sew. This sew is invisible from the entrance of the quilt, and it creates a robust and safe bond.
To stitch on quilt binding, you will want the next provides:
*
- Quilt binding
- Quilting thread
- Stitching machine
- Blind sew foot (non-obligatory)
In case you are utilizing a blind sew foot, connect it to your stitching machine in keeping with the producer’s directions. In case you are not utilizing a blind sew foot, you may nonetheless sew on quilt binding utilizing an everyday stitching foot. Nonetheless, the blind sew might be harder to see and will not be as sturdy.
To start, fold the quilt binding over the sting of the quilt, proper sides collectively. Sew the binding in place, utilizing a blind sew or an everyday sew. Watch out to not sew too near the sting of the quilt, as this will trigger the material to fray.
As soon as the binding is stitched in place, flip it to the again of the quilt and press it flat. Fold the binding over the sting of the quilt once more, incorrect sides collectively. Sew the binding in place once more, utilizing a blind sew or an everyday sew. This time, sew near the sting of the quilt to safe the binding.
Your quilt binding is now full! Take pleasure in your lovely completed quilt!
Individuals Additionally Ask About Tips on how to Sew On Quilt Binding
What’s one of the best ways to stitch on quilt binding?
One of the simplest ways to stitch on quilt binding is to make use of a blind sew. This sew is invisible from the entrance of the quilt, and it creates a robust and safe bond.
Can I take advantage of an everyday stitching machine to stitch on quilt binding?
Sure, you should utilize an everyday stitching machine to stitch on quilt binding. Nonetheless, the blind sew might be harder to see and will not be as sturdy.
How do I miter the corners of my quilt binding?
To miter the corners of your quilt binding, comply with these steps:
- Fold the binding in half on the nook, incorrect sides collectively.
- Press the fold flat.
- Unfold the binding and fold it in half once more, this time proper sides collectively.
- Press the fold flat.
- Sew the binding in place, utilizing a blind sew or an everyday sew.
- Trim the surplus binding.
