Disassembling the Samsung Galaxy Buds 2 case generally is a daunting process, particularly in the event you’re not aware of the intricacies of digital gadgets. Nevertheless, with the appropriate instruments and just a little little bit of persistence, it is solely attainable to pry it aside with out inflicting any harm. Whether or not you are trying to exchange a defective battery, repair a free hinge, or just fulfill your curiosity, this complete information will offer you the step-by-step directions you have to efficiently disassemble your Galaxy Buds 2 case.
Earlier than you start, it is important to assemble the mandatory instruments. You may want a small Phillips head screwdriver, a skinny plastic pry device, and a pair of tweezers. It is also a good suggestion to have a clear work floor and a comfortable fabric to guard the case from scratches. Upon getting every part you want, you’ll be able to proceed with the disassembly course of. Start by eradicating the 2 screws positioned on the underside of the case. These screws maintain the highest and backside halves of the case collectively. As soon as the screws are eliminated, fastidiously pry the 2 halves aside utilizing the plastic pry device. Be light and keep away from utilizing extreme pressure, as you do not wish to harm the case.
As soon as the case is open, you may have entry to the inner parts. The battery is positioned within the middle of the case, and it is held in place by two small screws. Take away the screws and punctiliously disconnect the battery from the motherboard. Subsequent, find the hinge that connects the highest and backside halves of the case. The hinge is held in place by two small screws. Take away the screws and punctiliously detach the hinge. As soon as the hinge is eliminated, you can fully disassemble the case. You should definitely preserve the entire screws and parts organized, as you may want them once you reassemble the case.
Supplies and Instruments Required
To efficiently disassemble the Galaxy Buds 2 case, you will have the next supplies and instruments:
**Supplies:**
- Galaxy Buds 2 case
- Smooth fabric or microfiber
- Isopropyl alcohol (advisable 91% or increased)
- Cotton swabs or lint-free wipes
- Precision screwdriver set (Phillips and Torx)
- Spudger or skinny plastic device
- Anti-static wrist strap (optionally available however advisable)
**Further Instruments for Superior Disassembly:**
- Soldering iron and solder wire
- Multimeter or continuity tester
- ESD-safe work floor
- Microscope (optionally available)
| Instrument/Materials | Function |
|---|---|
| Precision screwdriver set | Eradicating screws |
| Spudger or skinny plastic device | Prying open case parts |
| Anti-static wrist strap | Stopping electrostatic discharge |
Safely Unclip the Case
**Supplies Required:**
| Instrument | Description |
|---|---|
| Plastic Pry Instrument or Spudger | Skinny, flat device for separating case parts |
| Precision Screwdriver Set | Optionally available, for disassembling inside parts |
**Directions:**
- Insert Pry Instrument into Seam: Gently insert the pry device or spudger into the seam the place the highest and backside case halves meet. Begin from the hinge space and work your manner across the perimeter.
- Apply Upward Strain: Apply light upward stress whereas sliding the pry device alongside the seam. Keep away from making use of extreme pressure to stop harm.
- Unclip Latches: As you progress the pry device, you may really feel the case latches launch, permitting the highest half to separate from the underside half. Proceed sliding the device to unclip all latches.
- Separate Case Halves: As soon as all of the latches are launched, fastidiously raise the highest half of the case away from the underside half. Keep away from yanking or pulling on the case, as this might trigger harm.
Suggestions
- Use a plastic pry device to reduce the danger of scratches or harm to the case.
- If the latches are tough to launch, apply a small quantity of penetrating oil or WD-40 to the seam and permit it to soak in for a couple of minutes earlier than trying to unclip the case.
- If the case has a rubber seal across the edges, watch out to not tear it when separating the case halves.
Take away the PCB Panel
The PCB panel is held in place by just a few screws.
- Use a small Phillips head screwdriver to take away the screws.
- As soon as the screws are eliminated, fastidiously pry up the PCB panel with a plastic spudger or your fingernails.
- Watch out to not harm the PCB panel or any of the parts on it.
Here’s a desk summarizing the steps for eradicating the PCB panel:
| Step | Description |
|---|---|
| 1 | Use a small Phillips head screwdriver to take away the screws. |
| 2 | Fastidiously pry up the PCB panel with a plastic spudger or your fingernails. |
| 3 | Watch out to not harm the PCB panel or any of the parts on it. |
Detach the Charging Coil
The charging coil is positioned on the underside of the case and is held in place by just a few clips. To detach the charging coil, comply with these steps:
1. Insert a plastic spudger or pry device into the seam between the case and the charging coil.
2. Fastidiously pry the charging coil free from the case.
3. Disconnect the charging coil from the motherboard.
4. Take away the charging coil from the case.
| Charging coil location | Tools needed | Estimated time |
|---|---|---|
| Backside of the case | Plastic spudger or pry device | 5 minutes |
As soon as the charging coil has been indifferent, you’ll be able to proceed to disassemble the remainder of the case.
Disconnect the Battery
Upon getting eliminated the battery connector, the battery shall be disconnected from the motherboard. Now you can take away the battery from the case.
To take away the battery, gently pry it up with a spudger. Watch out to not harm the battery or the case.
As soon as the battery is eliminated, you’ll be able to get rid of it correctly. Most electronics shops will recycle batteries free of charge.
Listed below are some further ideas for disconnecting the battery:
| Tip | Description |
|---|---|
| Use a spudger or different plastic device to disconnect the battery connector. | This may assist stop harm to the battery or the motherboard. |
| Watch out to not short-circuit the battery. | This might trigger a hearth or explosion. |
| Get rid of the battery correctly. | Most electronics shops will recycle batteries free of charge. |
Take away the Hinges
The hinges are held in place by two screws. You will want a Phillips #00 screwdriver to take away them.
Find the screws on the again of the case. They’re positioned on both aspect of the hinge.
Unscrew the screws. Watch out to not lose them.
As soon as the screws are eliminated, you’ll be able to raise the hinges off of the case.
Further Particulars
* The screws are very small, so it is very important use a screwdriver that’s the appropriate dimension.
* It is usually vital to watch out to not overtighten the screws once you reassemble the case.
* If you’re having hassle eradicating the hinges, you’ll be able to attempt utilizing a pair of needle-nose pliers to grip the hinges and pull them off.
| Screw Dimension | Screw Location |
|---|---|
| Phillips #00 | Again of the case, on both aspect of the hinge |
Extract the Magnets
To extract the magnets, you may want a skinny, flat object like a spudger or dental decide.
1. Insert the thing into the small hole between the case’s high and backside halves, close to one of many corners.
2. Gently pry aside the case, ranging from the nook and dealing your manner across the perimeter.
3. As soon as the case is open, use the thing to fastidiously take away the magnets from their slots.
4. There are two magnets on both sides of the case, totaling 4 magnets in all.
5. Watch out to not lose the magnets, as they’re small and straightforward to misplace.
6. As soon as all of the magnets are eliminated, you’ll be able to proceed to the subsequent step of disassembly.
| Magnet Particulars |
|---|
| Form: Rectangle |
| Dimension: 2.5mm x 4.5mm |
| Materials: Neodymium |
| Polarity: Bipolar |
Cleansing and Inspection
1. Take away the ear ideas
Begin by eradicating the ear ideas from the earbuds. This may make it simpler to entry the charging case for cleansing.
2. Clear the charging contacts
Use a cotton swab dipped in rubbing alcohol to wash the charging contacts on the earbuds and within the charging case. This may assist stop any charging points.
3. Clear the mesh grills
Use a soft-bristled brush to wash the mesh grills on the earbuds and within the charging case. This may assist take away any grime or particles that might block the sound.
4. Examine the earbuds
Take an in depth have a look at the earbuds for any harm. Verify for cracks, dents, or some other indicators of damage and tear. In case you discover any harm, you might have to contact Samsung for a restore.
5. Examine the charging case
Take an in depth have a look at the charging case for any harm. Verify for cracks, dents, or some other indicators of damage and tear. In case you discover any harm, you might have to contact Samsung for a restore.
6. Dry the earbuds and charging case
Upon getting cleaned the earbuds and charging case, be sure you dry them completely earlier than utilizing them once more. You should use a comfortable fabric or a hair dryer on a low setting to dry them.
7. Reassemble the earbuds
As soon as the earbuds and charging case are dry, reassemble the earbuds by attaching the ear ideas.
8. Examine for any remaining points
As soon as the earbuds are reassembled, examine them for any remaining points. Check the sound, the match, and the charging performance. In case you discover any issues, you might have to contact Samsung for a restore.
Open the Case
To open the Galaxy Buds 2 case, find the small button on the again of the case and press it. The case will then pop open, revealing the earbuds.
Take away the Earbuds
To take away the earbuds from the case, gently pull them out. The earbuds are held in place by magnets, so they need to come out simply.
Clear the Earbuds and Case
To wash the earbuds and case, use a comfortable fabric or brush to take away any grime or particles. You too can use a disinfectant wipe to wash the case.
Examine the Charging Contacts
The charging contacts on the earbuds and case are important for charging the earbuds. Examine the contacts for any grime or particles, and clear them if vital.
Change the Earbuds
To switch the earbuds within the case, merely insert them into the charging slots. The earbuds shall be held in place by magnets, and they need to cost mechanically.
Reassemble the Case
To reassemble the case, merely shut the lid till you hear a click on. The case is now reassembled and able to use.
Listed below are some further ideas for reassembling the case:
- Be sure that the earbuds are correctly inserted into the charging slots earlier than closing the case.
- Don’t pressure the case closed. If the case doesn’t shut simply, examine to be sure that the earbuds are correctly inserted.
- If the case nonetheless doesn’t shut simply, attempt cleansing the charging contacts on the earbuds and case.
Further Data
The Galaxy Buds 2 case is designed to be waterproof, so it may well face up to being splashed with water. Nevertheless, it’s not waterproof, so it shouldn’t be submerged in water.
The Galaxy Buds 2 case can be used to cost a wi-fi charging pad. To cost the case wirelessly, merely place it on a wi-fi charging pad.
Listed below are some further ideas for utilizing the Galaxy Buds 2 case:
- Maintain the case clear to stop grime and particles from build up on the charging contacts.
- Don’t expose the case to excessive warmth or chilly.
- If the case is broken, don’t use it. Contact Samsung for help.
Opening the Case
Fastidiously insert a skinny object (equivalent to a plastic spudger or a guitar decide) into the small notch on the underside fringe of the case. Gently pry the 2 halves of the case aside, ranging from the underside. Work your manner across the edges, utilizing the identical method.
Eradicating the Battery
Find the battery contained in the case, and gently unplug the connector. Watch out to not harm the battery or the connector.
Disassembling the Case (1/2)
Find the 2 screws on the within of the case. Take away them utilizing a Phillips #00 screwdriver.
Disassembling the Case (2/2)
Fastidiously raise the highest half of the case off from the underside half. Watch out to not harm the wires or connectors.
Troubleshooting and Suggestions
Case Will not Open
Ensure you’re utilizing a skinny, blunt object. A pointy object may harm the case.
Battery Will not Come Out
Verify and double-check that you have unplugged the battery connector. If it nonetheless will not come out, apply light stress to the battery whereas pulling on the connector.
Screws Stripped
If the screws develop into stripped, attempt utilizing a rubber band to get a greater grip. You too can attempt making use of a small quantity of tremendous glue to the screwdriver tip.
Wires Disconnected
In case you by accident disconnect any wires, confer with the supplied wiring diagram to reconnect them accurately.
Case Not Working After Reassembly
Verify that each one the parts are correctly related. Additionally, be certain that the battery is absolutely charged.
Different Suggestions
Put on anti-static gloves to stop harm to digital parts.
Use a clear, well-lit workspace.
Take your time and do not pressure something open.
In case you’re having hassle, do not hesitate to contact an expert.
| **Instrument** | **Function** |
| Plastic spudger | Opening the case |
| Guitar decide | Opening the case |
| Phillips #00 screwdriver | Eradicating screws |
| Anti-static gloves | Stopping harm to parts |
Tips on how to Take Aside Galaxy Buds 2 Case
To take aside the Galaxy Buds 2 case, you will have the next instruments:
- A small Phillips head screwdriver
- A pry device or a spudger
- A pair of tweezers
Upon getting the mandatory instruments, comply with these steps:
- Take away the 2 Phillips head screws from the underside of the case.
- Use the pry device or spudger to softly pry open the case.
- Use the tweezers to take away the battery from the case.
- Use the pry device or spudger to take away the circuit board from the case.
- Use the tweezers to take away the speaker from the case.
- Use the pry device or spudger to take away the microphone from the case.
- Use the tweezers to take away the charging port from the case.
- Use the pry device or spudger to take away the hinge from the case.
- Use the tweezers to take away the magnet from the case.
Upon getting eliminated the entire parts from the case, you’ll be able to reassemble it by following the steps in reverse order.
Individuals Additionally Ask
How do I clear my Galaxy case?
To wash your Galaxy case, use a comfortable, damp fabric and wipe it down gently. You too can use a gentle cleaning soap answer if vital. Keep away from utilizing harsh chemical substances or abrasive cleaners, as these may harm the case.
How do I alter the battery in my Galaxy Buds 2 case?
To vary the battery in your Galaxy Buds 2 case, comply with these steps:
- Take away the 2 Phillips head screws from the underside of the case.
- Use the pry device or spudger to softly pry open the case.
- Use the tweezers to take away the battery from the case.
- Change the outdated battery with a brand new one.
- Reassemble the case by following the steps in reverse order.
How do I reset my Galaxy Buds 2 case?
To reset your Galaxy Buds 2 case, comply with these steps:
- Open the Galaxy Buds 2 case.
- Press and maintain the button on the again of the case for 10 seconds.
- The case will flash purple after which inexperienced to point that it has been reset.
