With regards to digital gadgets, it’s all the time a good suggestion to learn to take them aside. For instance, in case your PS4 Slim is experiencing points, you would possibly must open it as much as clear it or restore it. This information will present you safely disassemble your PS4 Slim as a way to work on it.
Earlier than you begin, you will need to collect the instruments you’ll need. You have to a Phillips #0 screwdriver, a T8 Torx screwdriver, and a spudger. After getting your instruments, you’ll be able to start the disassembly course of. Make certain to maintain monitor of all of the screws you take away, as placing your PS4 Slim again collectively would require utilizing them once more.
First, you’ll need to take away the highest cowl of the PS4 Slim. To do that, use the Phillips #0 screwdriver to take away the screw that’s positioned on the again of the console, subsequent to the ability port. As soon as the screw is eliminated, you’ll be able to elevate the highest cowl off of the console. Watch out to not harm the ribbon cable that connects the highest cowl to the motherboard.
Prepping for Disassembly
Important Instruments and Supplies
Earlier than embarking on the disassembly course of, collect the mandatory instruments and supplies to make sure a easy and profitable operation. These embrace:
- Phillips #00 Screwdriver
- Torx T8 Safety Screwdriver
- Plastic Pry Instruments
- Isopropyl Alcohol (Non-obligatory)
- Cotton Swabs (Non-obligatory)
- Anti-Static Wrist Strap (Beneficial)
- Magnetic Screw Tray (Beneficial)
Security Precautions
Previous to disassembly, observe the next security precautions to attenuate the chance of injury or harm:
- Energy down and unplug the PlayStation 4 Slim.
- Put on an anti-static wrist strap to stop electrostatic discharge (ESD) harm.
- Work on a steady and well-lit floor.
- Keep away from touching delicate elements, such because the motherboard or exhausting drive.
- Deal with screws rigorously and maintain them organized in a magnetic screw tray.
Floor Preparation
To make sure a clear and arranged workspace, the next floor preparation steps are really helpful:
| Step | Description |
|---|---|
| 1 | Clear a spacious space in your work floor. |
| 2 | Lay down a clear material or anti-static mat to guard the work floor and PlayStation 4 Slim. |
| 3 | Arrange a Magnetic Screw Tray close by to retailer the screws you take away. |
| 4 | Place the PlayStation 4 Slim on the ready floor, the other way up. |
Eradicating the Entrance Casing
Start by rigorously flipping the PS4 Slim the other way up and resting it on a delicate, clear floor. Find the three rubber toes on the underside of the console. Gently pry every one off utilizing a plastic pry software or your fingernails.
Subsequent, take away the 2 screws that have been hidden beneath the rubber toes. These screws are sometimes Phillips #0 screws. As soon as the screws are eliminated, the entrance casing could be lifted off. Grip the casing alongside the sides and gently pull it in the direction of you. There could also be some resistance from the clips that maintain the casing in place, nevertheless it ought to come off simply with slightly effort.
Cautions When Eradicating the Casing
When eradicating the entrance casing, you’ll want to deal with it with care to keep away from damaging the clips or the plastic housing. If the casing doesn’t come off simply, don’t power it. As a substitute, examine for any remaining screws or clips which will nonetheless be connected. It’s also vital to keep away from touching the circuit board contained in the console, as static electrical energy can harm the elements.
| Warning | Description |
|---|---|
| Keep away from forcing the casing | If the casing doesn’t come off simply, examine for remaining screws or clips. |
| Deal with with care | Keep away from damaging the clips or plastic housing. |
| Keep away from touching the circuit board | Static electrical energy can harm the elements. |
Accessing the Energy Provide
To entry the ability provide, you will must take away the again cowl of the PS4 Slim. To do that, find the screw on the again of the console, slightly below the ability button. Use a Phillips head screwdriver to take away the screw. As soon as the screw is eliminated, you’ll be able to slide the again cowl off the console.
Eradicating the Energy Provide
As soon as the again cowl is eliminated, you will see the ability provide. It is held in place by 4 screws. Use a Phillips head screwdriver to take away the screws. As soon as the screws are eliminated, you’ll be able to elevate the ability provide out of the console.
Disconnecting the Energy Provide
As soon as the ability provide is eliminated, you will must disconnect it from the console. To do that, find the ability connector on the again of the console. It is a white connector with two wires popping out of it. Use your fingers to squeeze the perimeters of the connector and pull it straight out of the console.
| Screw Location | Screw Kind |
|---|---|
| Again of the console, slightly below the ability button | Phillips head |
| Securing the ability provide | Phillips head |
Detaching the Exhausting Drive
Detaching the exhausting drive from a PS4 Slim requires some precision and care. Listed below are the detailed steps:
1. Energy Off and Unplug the PS4
Earlier than starting, make sure the PS4 is totally powered off and disconnected from any energy supply.
2. Find the Exhausting Drive Bay
Flip the PS4 over and find the exhausting drive bay on the underside. It is a rectangular opening lined by a detachable plate.
3. Take away the Exhausting Drive Bay Plate
Utilizing a Philips #0 screwdriver, unscrew the screw holding the exhausting drive bay plate in place. Gently elevate and take away the plate to reveal the exhausting drive.
4. Disconnect the Exhausting Drive
The exhausting drive is related to the PS4’s motherboard through a SATA cable and energy connector. Rigorously disconnect each cables from the exhausting drive:
a. SATA Cable: Gently pull the SATA cable straight up from its connector on the exhausting drive.
b. Energy Connector: Carry the small plastic tab on the ability connector and gently pull the connector straight up from the exhausting drive.
5. Take away the Exhausting Drive
As soon as disconnected, the exhausting drive could be eliminated. Gently slide it out of the bay in the direction of the again of the PS4 and elevate it out.
Eradicating the Blu-ray Drive
Step 1: Energy Down and Unplug the PS4 Slim
Earlier than disassembling the console, guarantee it is powered off and disconnected from any energy supply.
Step 2: Take away the Prime Cowl
1. Slide the highest cowl towards the again of the console.
2. Carry the quilt off from the entrance edge.
Step 3: Disconnect the Blu-ray Drive Ribbon Cable
1. Find the ribbon cable connecting the Blu-ray drive to the motherboard.
2. Use a spudger or your fingernail to softly pry up the latch securing the cable.
3. Rigorously pull the ribbon cable straight out from its connector.
Step 4: Unscrew the Blu-ray Drive Mounting Screws
1. Take away the 2 screws securing the Blu-ray drive to the chassis.
2. Place the screws in a protected place to keep away from dropping them.
Step 5: Carry Out the Blu-ray Drive
| Warning: The Blu-ray drive could also be delicate. Deal with it with care. |
|---|
|
1. Gently elevate the drive straight up and out of the console. |
|
2. Keep away from touching the lens or optical elements to stop harm. |
|
3. Set the Blu-ray drive apart on a steady floor. |
Disconnecting the Cables
6. Eradicating the Energy Provide Unit
Disconnecting the cables requires cautious consideration to element. Observe these steps to make sure the method is completed safely and appropriately:
- Disconnect the ability cable: Find the ability wire related to the again of the PS4 Slim. Gently grasp the plug and pull it straight out of the wall outlet.
- Unplug the information cable: Determine the HDMI cable or different knowledge cable related to the PS4 Slim’s entrance or again. Rigorously wiggle the cable side-to-side whereas pulling it out of the port.
- Take away the Ethernet cable: If an Ethernet cable is related to the again of the PS4 Slim, unplug it by urgent down on the discharge tab and pulling the cable out.
- Disconnect the USB cables: Find and unplug any USB cables related to the USB ports on the entrance or again of the PS4 Slim.
- Take away the auxiliary cables: Disconnect any extra cables, comparable to audio cables or optical cables, which may be related to the PS4 Slim.
- Confirm all cables are disconnected: Take a second to double-check that each one cables have been disconnected from the PS4 Slim earlier than continuing to the subsequent step.
Desk: Abstract of Cable Disconnection
| Cable Kind | Motion |
|---|---|
| Energy cable | Unplug from wall outlet |
| Knowledge cable (HDMI/different) | Unplug from PS4 Slim port |
| Ethernet cable | Press launch tab and unplug |
| USB cables | Unplug from PS4 Slim USB ports |
| Auxiliary cables (audio/optical) | Disconnect from PS4 Slim |
Lifting the Motherboard
As soon as the screws are eliminated, you’ll be able to elevate and take away the motherboard from the PS4 Slim. Nevertheless, it is vital to do that rigorously and keep away from placing any stress on different elements. Use each fingers to carry the perimeters of the motherboard and elevate it gently till the connectors on the underside are disengaged from the bottom.
Listed below are some extra suggestions for lifting the motherboard:
- Make certain the PS4 Slim is powered off and unplugged.
- Deal with the motherboard by the sides, avoiding touching the elements on the floor.
- In case you encounter any resistance when lifting the motherboard, examine to see if there are any cables or connectors which are nonetheless connected.
- Don’t elevate the motherboard by the ability provide connector.
- Watch out to not bend or harm the motherboard.
As soon as the motherboard is lifted, you’ll need to disconnect the next cables from the underside of it:
| Connector | Description |
|---|---|
| Energy provide connector | Connects the motherboard to the ability provide. |
| Blu-ray drive connector | Connects the motherboard to the Blu-ray drive. |
| Exhausting drive connector | Connects the motherboard to the exhausting drive. |
| Fan connector | Connects the motherboard to the cooling fan. |
Now, elevate and take away the motherboard is now separated from the PS4 Slim base and is prepared for repairs or substitute.
Eradicating the Warmth Sink
As soon as the ability provide, exhausting drive, and optical drive are eliminated, you can begin engaged on eradicating the warmth sink. It is a essential step, as it is advisable to watch out to not harm the fragile elements beneath.
Here is a step-by-step information on take away the warmth sink:
1. Take away the screws holding the warmth sink to the motherboard.
There are sometimes 4 screws that maintain the warmth sink in place. Use a Phillips #0 screwdriver to take away these screws.
2. Rigorously elevate the warmth sink straight up.
Watch out to not bump or harm any of the elements on the motherboard when lifting the warmth sink.
3. Take away the thermal paste from the CPU and warmth sink.
Use a cotton swab or a paper towel soaked in isopropyl alcohol to scrub the outdated thermal paste from the CPU and warmth sink. Make sure to take away the entire outdated paste, as it will assist guarantee good thermal contact between the CPU and the brand new warmth sink.
4. Apply new thermal paste to the CPU.
Use a small pea-sized quantity of thermal paste and apply it to the middle of the CPU. Watch out to not apply an excessive amount of thermal paste, as this could result in overheating.
5. Reinstall the warmth sink onto the CPU.
Rigorously align the warmth sink with the CPU and gently decrease it into place. Tighten the screws to safe the warmth sink to the motherboard.
6. Reconnect the ability cables to the motherboard.
Reconnect the ability cables that you simply eliminated earlier to energy the motherboard and the remainder of the elements.
7. Check the PS4 Slim to verify it is working correctly.
As soon as you’ve got reassembled the PS4 Slim, flip it on and take a look at it to verify it is working correctly. If the PS4 Slim would not activate or would not work correctly, double-check your connections and guarantee that the entire elements are seated appropriately.
8. Troubleshooting suggestions
In case you’re having bother eradicating the warmth sink, listed here are just a few troubleshooting suggestions:
| Drawback | Answer |
|---|---|
| The screws are caught and will not come out. | Strive utilizing a screwdriver with a greater grip, or strive utilizing a small quantity of penetrating oil to loosen the screws. |
| The warmth sink is caught to the CPU and will not come off. | Strive gently rocking the warmth sink backwards and forwards to loosen it. You too can strive utilizing a warmth gun to warmth up the warmth sink, which is able to assist loosen the thermal paste. |
| I by accident broken the CPU or the warmth sink. | In case you’ve broken the CPU or the warmth sink, you’ll need to interchange it. You should purchase substitute components from Sony or from a third-party retailer. |
Detaching the CPU and GPU
The CPU and GPU are positioned on the motherboard of the PS4 Slim. To detach them, you’ll need to:
- Take away the screws that safe the motherboard to the chassis.
- Rigorously elevate the motherboard out of the chassis.
- Find the CPU and GPU on the motherboard. They’re massive, sq. chips with heatsinks connected.
- Use a spudger or different pry software to softly pry the heatsinks off of the CPU and GPU.
- As soon as the heatsinks are eliminated, you will notice the CPU and GPU dies. They’re small, sq. chips with gold-plated contacts.
- Use a pair of tweezers to rigorously elevate the CPU and GPU dies out of their sockets.
- Place the CPU and GPU dies in a protected place, comparable to an anti-static bag.
- Reassemble the PS4 Slim in reverse order.
Observe:
The CPU and GPU are delicate elements. Make sure to deal with them with care to keep away from damaging them.
| Instrument | Function | |
|---|---|---|
| ✔ | Phillips #0 screwdriver | Take away the screws that safe the motherboard to the chassis. |
| ✔ | Spudger | Pry the heatsinks off of the CPU and GPU. |
| ✔ | Tweezers | Carry the CPU and GPU dies out of their sockets. |
Reassembly
After getting cleaned the elements, it is time to reassemble the PS4 Slim. Observe these steps in reverse order to place every thing again collectively:
- Insert the exhausting drive again into its bay.
- Screw the exhausting drive again into place.
- Join the ability provide to the motherboard.
- Safe the ability provide with the 2 screws.
- Join the fan to the motherboard.
- Safe the fan with the 4 screws.
- Place the optical drive again into the console.
- Safe the optical drive with the screws.
- Join the ribbon cables and energy connector to the motherboard.
- Place the highest cowl again on the console.
- Safe the highest cowl with the screws.
- Flip the console over and place it on its toes.
Testing
After getting reassembled the PS4 Slim, it is time to take a look at it to verify it is working correctly. Observe these steps:
- Plug the console into an influence outlet.
- Insert a sport disc into the optical drive.
- Activate the console.
- Watch for the sport to load.
- Begin taking part in the sport.
If the console is working correctly, it’s best to have the ability to play the sport with none issues. In case you encounter any points, it’s possible you’ll must seek the advice of knowledgeable for assist.
How To Take Aside Ps4 Slim
To take aside a PS4 Slim, you’ll need the next instruments:
- Phillips #0 screwdriver
- Torx T8 screwdriver
- Plastic spudger
- Tweezers (non-compulsory)
After getting gathered your instruments, comply with these steps:
1. Unplug the PS4 Slim from the ability outlet and switch it off.
2. Place the PS4 Slim on a flat floor.
3. Use the Phillips #0 screwdriver to take away the 4 screws on the underside of the PS4 Slim.
4. Carry the highest cowl of the PS4 Slim off.
5. Use the Torx T8 screwdriver to take away the screw that’s positioned on the appropriate facet of the PS4 Slim, close to the ability button.
6. Carry the plastic cowl off of the PS4 Slim.
7. Use the tweezers to take away the ribbon cable that’s related to the ability button.
8. Use the plastic spudger to disconnect the opposite ribbon cables which are related to the motherboard.
9. Carry the motherboard out of the PS4 Slim.
10. Use the Torx T8 screwdriver to take away the screws which are holding the warmth sink in place.
11. Carry the warmth sink off of the PS4 Slim.
12. Use the plastic spudger to disconnect the ribbon cable that’s related to the fan.
13. Carry the fan out of the PS4 Slim.
14. The PS4 Slim is now disassembled.
